ProTool Water Powered Brushes

Example of Tank Feeding a Water Powered Rotary brush using a 12v battery or a 60amp (7,200 watt) 12v power supply 

Counter Rotating Brush Water powered are used to clean Atrium Glass, Solar Panels, glass Porticos, Metal Roofs, Granite walkways. This brush will help to make quick work of cleaning glass and other smooth surfaces that approach horizontal. Not for use with Hot water, Max 105 Degrees F (40 C). For Pressure washing sizing the Brushes 2 tips (#3.5) are the same as a #7 tip in your Pressure washer. When using an Extension Wand that has an M22 Male Tip on the end. Then to attach the water poered brush be sure to order a Female to Female M22 Fitting to connect the brush to the extension wand.

Additional Lithium Battery Pack, Solar Brush is the LiOn batery pack for the Dual Rotating 25in Solar Brush. Lasts 4 to 5 hours in use with the brush, takes 10 to 12 hours to charge.

32in Water Powered Rotary Brush Complete Kit is designed to clean Solar Panels, Atrium Glass, flat Glass Skylights, this is a complete brush and pole kit that will attach to a small pressure washer and water source. It is a mobile, hand-controlled scrubbing brush designed to be controlled by an operater from 5 to 25 feet away. Water Powered, via a pressure washer, these Brushes save considerable time compared to traditional Water Fed pole brushes. Requirements: 2.7GPM 3000psi Pressuer Washer, a water source, brush operates best at 2.5 gallons per minute water flow with a small Pressure Washer. It is powered by a small pressure washer Rotary Brush can be used with tap water or RO Water for spot free rinsing.

Hose for Solar Brush 1/4in 50ft with 1/4in one end 3/8in on other is used to connect the pressure washer to the wand or surface cleaner when pressure washing. 50ft hose is typically manually rolled up for storage. Lengths from 100ft and longer are stored on a reel on the service vehicle. An excellent pole choice for use with the Solar Brushes, Softwash Spraying Tips etc. Remove the Brush and the First Section and use this Pressure Washing hose to mount a M22 Fitting for Solar Brush attachment.

Guard for Rotary Brush 32in 80cm 2 Hole is attached to the rotating brush 32in - 80CM. This version allows placement on the brush so the brush may turn in either direction based upon the hole choice used. Rotary hydrokinetically brushes offer considerable time savings in the cleaning operation performed on solar panels and building surfaces.