.png?w=400&h=400)
32in Water Powered Rotary Brush Complete Kit
Quick Overview
- Designed to clean Solar Panels, Atrium Glass, flat Glass Skylights, this is a complete brush and pole kit that will attach to a small pressure washer and water source
- It is a mobile, hand-controlled scrubbing brush designed to be controlled by an operater from 5 to 25 feet away
- Water Powered, via a pressure washer, these Brushes save considerable time compared to traditional Water Fed pole brushes
- Requirements: 2.7GPM 3000psi Pressuer Washer, a water source, brush operates best at 2.5 gallons per minute water flow with a small Pressure Washer
- Powered by a small pressure washer Rotary Brush can be used with tap water or RO Water for spot free rinsing
Show More
32in Water Powered Rotary Brush Complete Kit
Brush and Pole Kit with Hose 32in Water Powered for Cleaning Large Surfaces
Introducing the 32-inch Water Powered Rotary Brush Complete Kit, meticulously engineered to efficiently clean solar panels, atrium glass, and flat glass skylights with precision and ease. This comprehensive brush and pole kit is designed to seamlessly attach to a small pressure washer and water source, providing a convenient solution for thorough cleaning tasks.
This mobile, hand-controlled scrubbing brush is specifically designed to be operated by an operator from a distance of 5 to 25 feet, ensuring flexibility and ease of use in various cleaning scenarios. Powered by water pressure from a pressure washer, these brushes save considerable time compared to traditional Water-Fed pole brushes, making them ideal for efficient cleaning operations.
The 32-inch Water Powered Rotary Brush Complete Kit requires a pressure washer with a minimum flow rate of 2.7 gallons per minute (GPM) and a pressure rating of 3000 psi for optimal performance. The brush operates best at a water flow rate of 2.5 gallons per minute with a small pressure washer, ensuring efficient cleaning results.
Powered by a small pressure washer, the Rotary Brush can be used with tap water or RO (Reverse Osmosis) water for spot-free rinsing, delivering exceptional cleaning performance while minimizing water consumption.
Upgrade your cleaning routine with the 32-inch Water Powered Rotary Brush Complete Kit, designed to streamline your cleaning tasks and achieve superior results with ease and efficiency.
Pressure Washer not included
For Pressure washing sizing the brush is the same usage as a #7 tip
Pressure washer:
Weight: 12.5lbs
Includes the Pole, Attachment hose and Brush Adaptor, Water powered Rotating Brush 32in
Rotating Brush User Manual
Instructions for Use:
- Connect the brush to the telescopic lance.
- Position the unit on the surface to be cleaned.
- Open the water valve on the telescopic lance.
- Begin cleaning the surface.
- Close the telescopic lance’s valve.
- Turn off the water supply
- Open the telescopic lance’s valve to discharge the residual pressure.
Connecting to the Gardiner SLX Pole
Assemble the pole adaptor and hose so that the hose is through the center of the pole, Attach the Pole Adaptor to the 1/4in Fitting that exits the top of the ope, and at the bottom of the pole attache the fittings you intend to use to the 3/8in m,ale hose end ...
Then to attach the 24v powered brush to the Pole Adaptor using the M22 Twist Fitting
Specifications:
Width: 31.5 in.(800mm)Diameter: 5.9 in. (150mm)
Weight: 9.47 lbs (4.3Kg)
Bristle: 0.6 in.(15mm)
Attachment: M22 x 1.5mm Connector
CLEANING COATED OR PAINTED SURFACES
Using water on glued parts may cause them to become detached. Do not use the unit on wood floors or parquet that are not well-sealed.
Be careful when cleaning doors, parquet, painted surfaces or surfaces coated with synthetic products, and aluminum panels.
Before using the brush, we advise performing a test on a portion of the surface that is not in view, to prevent damage or alterations during cleaning.
PRODUCTS TREATED – HANDLED OR GENERATED
Verify in the photovoltaic system’s operating manual the type of brushes that can be used for cleaning it, so as not to cause abrasions on the panels’ film.
It is important to avoid all operating situations that could cause repeated and unexpected stops of the brush’s rotation, such as those specified below:
- In the case of surfaces comprised of panels, the maximum distance between them must be 3 cm to prevent the unit from dropping into the empty space between one panel and the next.
- The surfaces must be as free as possible of protruding parts such as long screws, brackets, and terminals, which could obstruct brush rotation or rharm the bristles.
- This is a low water pressure brush, water can be from the tap, or one of many water pumps and water boost pumpes. Generally less tan 100PSI
- When not in operation, never allow the unit’s weight to rest on the rollers’ bristles so as not to bend them when resting.
Included in the Kit
Included in the Kit
Regulator and Gauge
Use a Pressure Gauge to undestand the pressure at the brush
Install the Gauge on the water connector on the brush
Test Run your your pressure washer and supply water to the brush from your running pressure washer the PSI should be between 290 psi and 725 psi.
One you have your system setup at the correct pressure ytou can remove and store the gauge for future testing
Alway test again after a pressure washer has been worked on or should a different pressre washer is put in place to power the brush
NOTE:
If your pressure Washer is running the brush at more that 725PSI then immediatly stop the water flow.
You can try a smaller pressure washer or install and adjust a Pressure Regulator to set the pressure to the suggested 600 to 650 psi to run the brush. (Max 725psi)
How to check your Flow from your Pressure Washer
- 1min 50 seconds (2.7 gpm) and
- 2 min 20 seconds (2.14 gpm)
Regulator and Guage not included
Testing and Setting Water Pressure
If your pressure washer is to big you will need to usea Pressure Regulator to control the Pressure - Target 600 to 650 PSI.
Here the gauge is installed
Attached to the Pressure washer and run the brush, ig you are between 550 and 650psi you are good to go.
Gauge is included in Kit
Attach a Pressure Regulator and Test, Set PSI
If the pressure is more than 725 PSI then install and adjust a pressure regulator to the target of 600 to 650psi. (Max 725)
Pressure Regulator is included in the Kit
Gauge can be removed for day to day use
Once you know your settings are correct you may remove th egauge for day to day cleaning
Keep the gauge handy should the pressure washer used be swapped out so you can test again
Pressure Regulator is included in the Kit
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water. Proposition 65 requires California to publish a list of chemicals known to cause cancer, birth defects or other reproductive harm. This list, which must be updated at least once a year, has grown to include approximately 900 chemicals since it was first published in 1987. Proposition 65 became law in November 1986, when California voters approved it by a 63-37 percent margin. The official name of Proposition 65 is the Safe Drinking Water and Toxic Enforcement Act of 1986.
The list of chemicals contains a wide range of naturally occurring and synthetic chemicals that include additives or ingredients in pesticides, common household products, food, drugs, dyes, or solvents. Listed chemicals may also be used in manufacturing and construction, or they may be byproducts of chemical processes, such as motor vehicle exhaust. For more information visit www.p65warnings.ca.gov/
