Videos
Dual RO Wall or Truck Mount with 20in Carbon and DI Filters and 50 Gallon water tank, 2 Pumps
Quick Overview
- Dual RO, DI Pure Water Wall Mount system that is a Kit that requires Assembly and Installation
- Dual 12V pumps, One for RO boost and one for water delivery. Pump controller for full control over delivery pump
- Dual 40in RO Industry Standard Membrane provides 1.5 to 2 gpm+ of flow and with the proper startup and end of job procedure followed will last 5 to 7 years.
- 20 inch DI and Carbon filters provides long service life
- Great for single or dual water fed pole operators who want a mounted system that is ready to use out of the box (once mounted)
Show More
Dual RO Wall or Truck Mount with 20in Carbon and DI Filters and 50 Gallon water tank, 2 Pumps
ProTool Single Operator System Kit
Assembly required and installation in the Vehicle of on the wall.
Assembly and Installation in your Vehicle or on Wall required.
20in Housings 1ea Carbon and 1ea DI Filter with Two SS RO Housings Kit Overview:
- 2 - 40in RO Membranes in SS Housings
Offering excellent filter life and lots of water flow
- 1 - 20" Carbon Filter and Housing Long Lasting Carbon Filter, 120,000 Gallons
- Change once every 6 months
- NOTE:
- The RO membranes may fail in the field if the carbon filter is not maintained.
- Regular maintenance of the Carbon Filter is very important for RO service life, which is why this kit offers a larger 20" Carbon Filter. Replace this every 6 months.
- RO membranes must be stored above 34 degrees F to avoid damaging the filter.
The RO membranes may fail in the field if the carbon filter is not maintained.
- 1 - 20" DI Filter and HousingGreat Capacity DI Cartridge, reduces Refills
- 2 - 12v pumps for 1ea for RO boost and 1ea for Water delivery
Produces 2 - 2.25 GPM of RO production into tank
Variable Pure Water Delivery flow from 0.5 to 3.5 GPM (managed by the pump controller) of pure water delivered to the brush.
- Pump controller offers precise control of water flow, extends pump and battery life
- Pre-assembled ready to mount to the wall!
- *Note carbon/DI are not installed in the system on delivery.
- Everything you need to assemble is included, including the tank Just add or connect to your your 12V battery.
Installation Example:
Plate with Dual RO Membrane and the Carbon and DI Filters install in Van, 2 ROs pumps will make 2 Gallons per minute into the tank.
Installation as shown from just outside the Van
Pumps (RO Pressure and Operator Deliver Pump) and Controller are mounted on a plate and located within easy reach of the door
Pump Plate Detail
The Pump Controller extends battery life, controls water flow for the operator and is easy to use. 5 GPM.
The Pump Controller manages water flow from the pump from as low as 1/2 gallon a minute for 1st floor windows to 3.5 GPM for Solar Work
Installation as shown from just outside the Van
Pumps (RO Pressure and Operator Deliver Pump) and Controller are mounted on a plate and located within easy reach of the door
Water connection next to the pump plateis Bypass water out from the RO membranes.
Van Installation Details:
Tank Based system
This tank based DIY system is unmatched. Produce RO water in to a holding tank. Deliver pure water at 3.5 GPM +. All at an unbeatable price.
Excellent Water flow Similar to tap water, or DI tank pressure and flow.
Kit includes 55 gallon tank
Wall Mount for Housings
- Versatile Aluminum frame fits 2 stainless steel housings and 2 plastic housings.
- Mount in a van, on a flat bed truck or trailer
- 1 Carbon Filter
- 2 RO filters
- 1 DI filter
Wall Mount for Pumps
- 2 - 12V pumps for RO boost and delivery
- Bus bars to manage electrical wires
- 40 amp breaker switches
- Spring V16 Pump controller for full control over water flow for one user
- From 0.5 to 3.5 GPM of pure water
- System capable of running two Water-Fed pole operators off one line.
Kit that required Assembly and
Installation into your vehicle.
The installation would be the attachment of
The RO Membranes and 20in Housing Plate to the vehicle, wall.
The Pump Plate to an accessible position to be able to control the pumps
Fitment of the Tank and securing it in position.
Routing of the Plumbing, hoses tubes from inlet to the Pump plate, housing plate and water storage tank.
RODI 20in Filters with 2 Standard flow ROs and 1 RO Boost Pump
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water. Proposition 65 requires California to publish a list of chemicals known to cause cancer, birth defects or other reproductive harm. This list, which must be updated at least once a year, has grown to include approximately 900 chemicals since it was first published in 1987. Proposition 65 became law in November 1986, when California voters approved it by a 63-37 percent margin. The official name of Proposition 65 is the Safe Drinking Water and Toxic Enforcement Act of 1986.
The list of chemicals contains a wide range of naturally occurring and synthetic chemicals that include additives or ingredients in pesticides, common household products, food, drugs, dyes, or solvents. Listed chemicals may also be used in manufacturing and construction, or they may be byproducts of chemical processes, such as motor vehicle exhaust. For more information visit www.p65warnings.ca.gov/
