Welcome to J. Racenstein Co  (201) 809-7500  |   Q & A  |   Help  |  Catalogs  |  About Us  |  Events
Free Shipping on Orders over $50, look for Weekend Savings
Summer Weekend Savings (View in Cart)

32in Rotary Brush Kit Electric Complete with Carbon Pole, 50ft Hose

Quick Overview

  • Designed to clean Solar Panels, Atrium Glass, flat Glass Skylights, this is a complete brush and pole kit that will attach to a water source
  • It is a mobile, hand-controlled scrubbing brush designed to be controlled by an operater from 5 to 25 feet away
  • Electric powered brushes save considerable time compared to traditional waterfed pole brushes
  • Requirements: 24v Power Supplied by Battery system and water source, brush operates best at 1.5 to 2.5 gallons per minute water flow of Tap, Deionized or RO Pure Water
  • Powered by 24v Power Source this Rotary Brush can be used with tap water pressure or the feed water can be boosted using a wash pump or boost pump

Show More
Item #: 159-1202  UPC : 00669893027220  MPN : 32in Solar Brush

$4,296.10

$4,985.80

 
 
 Available Built to Order, Ships in a Week
This is an obsolete Item

Rotary Brush 32 in (80 cm) Electric Powered (24v)


The 32in 24v Electric Brush Complete Kit is a versatile cleaning solution meticulously designed for effectively cleaning solar panels, atrium glass, flat glass skylights, and other smooth surfaces. This comprehensive kit includes a brush and pole assembly, providing everything needed to attach to a water source and achieve sparkling results.

Featuring a mobile, hand-controlled scrubbing brush, this kit allows operators to clean surfaces from a distance of 5 to 25 feet away, offering flexibility and convenience during operation. With electric-powered brushes, significant time savings are achieved compared to traditional Water Fed pole brushes, enhancing efficiency and productivity.

The brush performs optimally with a water flow rate of 2 to 4 gallons per minute, whether from tap water, deionized water, or reverse osmosis (RO) pure water.

The brush is Powered by a 110v Power Supply that is included in this kit sized to run the 24v Motor on the brush , this rotary brush can utilize tap water pressure, or the feed water can be boosted using a wash pump or other boost pump for enhanced performance and cleaning power. This flexibility ensures that users can adapt the cleaning process to suit their specific needs and preferences.

With its comprehensive design and advanced features, the 32in 24v Electric Brush Complete Kit offers a versatile and efficient solution for a wide range of cleaning applications. Whether tackling solar panels or glass surfaces, this kit delivers exceptional results, making it an essential tool for professionals and DIY enthusiasts alike.


For Cleaning Large Surfaces, Solar Panels, Atrium Glass, large flat surfaces.

The rotating roller brush was designed and built to clean solar panels, but is quite capable of cleaning many different large surfaces, Atrium Glass, EDPM Membrane Roofs, Granite and other hard surfaces. 
It is a mobile, hand-operated unit designed to be positioned and operated manually on the surface to be cleaned.
Rotary electrically powered brushes offer considerable time savings in the cleaning operation performed on solar panels and building surfaces when compared to traditional fixed brushes.
Included:

  • 32in Electric Solar Brush 24v
  • Solar Brush End Caps
  • ProTool Oval Carbon Fiber Pole 27ft
  • Pole Adapter and 50 ft of Hose
  • 110v Power Supply 300watts of 24v power with End Connector to power the 32in Brush 

Requirements:
  • 110v Power Source at 2 amps 
    • 200 watts are required to run the brush
    • The power supply included has a 300 watt capacity at 24v
  • 2 to 4 Gallons per minute consumption RO Purified water recommended for Solar Panels,  though some jobs may be cleaned with Tap water and  other sites may specify Deionized water.  
Recommended Wash Sprayer or boost pump for water supply (not included in this kit)  150-0503 High Flow Pump Plate

This Pump Plate can be connected to Tank Draw or Water Tap Pressure  

Included  Hose Connection for the Gardiner Water Fed pole and Garden Hose connection

ProTool Oval 27ft carbon Fiber pole is included 31ft of Reach.



Kit includes the power supply and 

the ProTool Oval Carbon Fiber Pole 27ft with Adaptor Connections and 50ft of Hose


Other Addon Items to Consider

100v Extension Cable from receptacle to operator.

200ft of Water Delivery Hose from pump to operator 150-0303

Pure Water system to deliver 4GPM+ RO or DI Water to the Brush .

High Flow Pump System 150-0503 to deliver 4 GPM to the Brush from your RO water source

110v Pure Water Cart that delivers 3 GPM RO or DI Water to the brush 150-0523

A small Small Pressure washer 2.5 to 3 GPM can also be used to pump water to the brush at low pressure.

Example of Powering the 24v Brush with a Battery Setup

Two 12v Batteries can be wired in Series

This will create a 24v circuit for running the brush


24v Batteries are also commonly available

This LifePO battery will last longer than a lead acid battery

A Clipped connector to a 24 battery would allow for easy removal of the battery for charging 

Wiring Kits are available on Amazon to ease the wiring of two 12v batteries into 24v circuit

Use a 24v Battery Charger to make the charging easy to manage, clip to the same terminals the Brush attaches to.





Battery and Power Systems shown above - Not Included with the Rotary Brush




Instructions for Use:
  1. Connect the brush to the telescopic pole or pressure washer lance.
  2. Position the unit on the surface to be cleaned.
  3. Open the water valve on the telescopic lance.
  4. Turn on the Power Switch to the desired rotation direction
  5. Begin cleaning the surface.
 Power Switch allows for forward and reverse rotation of the brush, and power off

Stopping the Brush - Turning off the cleaning

  1. Close the telescopic lance’s valve.
  2. Turn off the Switch from the Power Supply/Battery
  3. Turn off the water supply
  4. Open the telescopic lance’s valve to discharge the residual pressure.


Specifications:

  • Width: 31.5 in.(800mm)
  • Diameter: 5.9 in. (150mm)
  • Weight: 14 lbs (6.3Kg)
  • Bristle: 0.6 in. (15mm)
  • Attachment: M22 x 14mm Connector
  • Current Draw is up to 200watts nominal (Typical is 4.1Amps at 24v) use an 300w capable power supply
  • Max. Water Temperature: 104° F (40° C)

CLEANING COATED OR PAINTED SURFACES
Using water on glued parts may cause them to become detached. Do not use the unit on wood floors or parquet that are not well-sealed.
Be careful when cleaning doors, parquet, painted surfaces or surfaces coated with synthetic products, and aluminum panels.
Before using the brush, we advise performing a test on a portion of the surface that is not in view, to prevent damage or alterations during cleaning.

PRODUCTS TREATED – HANDLED OR GENERATED
Verify in the photovoltaic system’s operating manual the type of brushes that can be used for cleaning it, so as not to cause abrasions on the panels’ film.

It is important to avoid all operating situations that could cause repeated and unexpected stops of the brush’s rotation, such as those specified below:
- In the case of surfaces comprised of panels, the maximum distance between them must be 3 cm to prevent the unit from dropping into the empty space between one panel and the next.
- The surfaces must be as free as possible of protruding parts such as long screws, brackets, and terminals, which could obstruct brush rotation or rharm the bristles.
- This is a low water pressure brush, water can be from the tap, or one of many water pumps and water boost pumpes. Generally less tan 100PSI

- When not in operation, never allow the unit’s weight to rest on the rollers’ bristles so as not to bend them when resting.


Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.  These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water. Proposition 65 requires California to publish a list of chemicals known to cause cancer, birth defects or other reproductive harm. This list, which must be updated at least once a year, has grown to include approximately 900 chemicals since it was first published in 1987. Proposition 65 became law in November 1986, when California voters approved it by a 63-37 percent margin.  The official name of Proposition 65 is the Safe Drinking Water and Toxic Enforcement Act of 1986.

The list of chemicals contains a wide range of naturally occurring and synthetic chemicals that include additives or ingredients in pesticides, common household products, food, drugs, dyes, or solvents. Listed chemicals may also be used in manufacturing and construction, or they may be byproducts of chemical processes, such as motor vehicle exhaust.  For more information visit www.p65warnings.ca.gov/

Item #:159-1201
Regular Price: $4,161.75
$3,656.30
Item #:159-1351
Regular Price: $3,949.00
$3,440.75
Item #:159-1352
Regular Price: $298.90
$250.60
Item #:74-3624
Regular Price: $223.60
$187.45