.jpg?w=400&h=400 "39in Rotary Brush Kit Electric Complete with Carbon Pole, 50ft Hose Image 3")
.jpg?w=400&h=400 "39in Rotary Brush Kit Electric Complete with Carbon Pole, 50ft Hose Image 4")
39in Rotary Brush Kit Electric Complete with Carbon Pole, 50ft Hose
Quick Overview
- High-Efficiency Cleaning: Designed for solar panels, atrium glass, and flat skylights, this kit ensures thorough and efficient cleaning.
- Requirements: RO or RODI filtered water source, brush operates best at 2 to 3 gallons per minute water flow of Tap, Deionized or RO Pure Water
- Versatile Use: Includes a 27ft carbon fiber pole, 50ft pressure hose, brush adapter, pressure regulator, gauge, ball valve, and splash guard.
- Enhanced Control: The oval-shaped carbon fiber pole provides rigidity and control, extending up to 27ft and collapsing to 5.5ft
- Powered by standard 110v power cord this Rotary Brush can be used with tap water pressure or the feed water can be boosted using a wash pump or boost pump
Show More
$6,024.15
$7,298.55
Rotary Brush 39 in (100 cm) Electric Powered
The 39in Electric Brush Complete Kit is a versatile cleaning solution meticulously designed for effectively cleaning solar panels, atrium glass, flat glass skylights, and other smooth surfaces. This brush is powered by a standard 110v Power cord and consumes less than 4 amps (450 watts) of power and can be run easily on a small 800watt generator. This comprehensive kit includes a brush and pole assembly, providing everything needed to attach to a water source and achieve sparkling results.
Featuring a mobile, hand-controlled scrubbing brush, this kit allows operators to clean surfaces from a distance of 5 to 25 feet away, offering flexibility and convenience during operation. With electric-powered brushes, significant time savings are achieved compared to traditional Water-Fed pole brushes, enhancing efficiency and productivity.
The brush performs optimally with a water flow rate of 2 to 4 gallons per minute, whether from tap water, deionized water, or reverse osmosis (RO) pure water.
The brush is Powered by a 110v Power Supply that is included in this kit sized to run the DC Motor on the brush , this rotary brush can utilize tap water pressure, or the feed water can be boosted using a wash pump or other boost pump for enhanced performance and cleaning power. This flexibility ensures that users can adapt the cleaning process to suit their specific needs and preferences.
With its comprehensive design and advanced features, the 39in Electric Brush Complete Kit offers a versatile and efficient solution for a wide range of cleaning applications. Whether tackling solar panels or glass surfaces, this kit delivers exceptional results, making it an essential tool for professionals and DIY enthusiasts alike.
For Cleaning Large Surfaces, Solar Panels, Atrium Glass, large flat surfaces.
The rotating roller brush was designed and built to clean solar panels, but is quite capable of cleaning many different large surfaces, Atrium Glass, EDPM Membrane Roofs, Granite and other hard surfaces.
- 32in Electric Solar Brush
- Solar Brush End Caps
- ProTool Oval Carbon Fiber Pole 27ft
- Pole Adapter and 50 ft of Hose
- 110v Power Supply 400watts of 30v power with End Connector to power the 39in Brush
- 110v Power Source at 4 amps
- 400 watts are required to run the brush
- The power supply included has a 400 watt capacity at 30v
- 2 to 4 Gallons per minute consumption RO Purified water recommended for Solar Panels, though some jobs may be cleaned with Tap water and other sites may specify Deionized water.
This Pump Plate can be connected to Tank Draw or Water Tap Pressure 
Included Hose Connection for the Gardiner Water-Fed pole and Garden Hose connection
ProTool Oval 27ft carbon Fiber pole is included 31ft of Reach.
Kit includes the 110v to 400 watt supply supply and
the ProTool Oval Carbon Fiber Pole 27ft with Adaptor Connections and 50ft of Hose
Note:
Water coming out of the center when the brush is off the panel and not rotating is expected performance.
The rotating brush with the spiral bristles move the water (and dirt) out of the center and to the outside, you want more water in the middle to start the process.
Other Addon Items to Consider
100v Extension Cable from receptacle to operator.
200ft of Water Delivery Hose from pump to operator 150-0303
Pure Water system to deliver 4GPM+ RO or DI Water to the Brush .
High Flow Pump System 150-0503 to deliver 4 GPM to the Brush from your RO water source
110v Pure Water Cart that delivers 3 GPM RO or DI Water to the brush 150-0523
A small Small Pressure washer 2.5 to 3 GPM can also be used to pump water to the brush at low pressure.
Example of Powering the Electric Brush with a Battery Setup
Use a Quality Battery Charger to make the charging easy to manage.
Battery and Power Systems shown above - Not Included with the Rotary Brush
Instructions for Use:
- Connect the brush to the telescopic pole or pressure washer lance.
- Position the unit on the surface to be cleaned.
- Open the water valve on the telescopic lance.
- Turn on the Power Switch to the desired rotation direction
- Begin cleaning the surface.
-yH7dv1.png)
Power Switch allows for forward and reverse rotation of the brush, and power off Stopping the Brush - Turning off the cleaning
- Close the telescopic lance’s valve.
- Turn off the Switch from the Power Supply/Battery
- Turn off the water supply
- Open the telescopic lance’s valve to discharge the residual pressure.
Specifications:
- Width: 31.5 in.(800mm)
- Diameter: 5.9 in. (150mm)
- Weight: 14 lbs (6.3Kg)
- Bristle: 0.6 in. (15mm)
- Current Draw is up to 300watts nominal (Typical is up to 10 Amps 30V) a 400w (13 amp) 30V power supply is included
- The 110v Current Draw is less than 4 Amps
- Max. Water Temperature: 104° F (40° C)
CLEANING COATED OR PAINTED SURFACES
Using water on glued parts may cause them to become detached. Do not use the unit on wood floors or parquet that are not well-sealed.
Be careful when cleaning doors, parquet, painted surfaces or surfaces coated with synthetic products, and aluminum panels.
Before using the brush, we advise performing a test on a portion of the surface that is not in view, to prevent damage or alterations during cleaning.
PRODUCTS TREATED – HANDLED OR GENERATED
Verify in the photovoltaic system’s operating manual the type of brushes that can be used for cleaning it, so as not to cause abrasions on the panels’ film.
It is important to avoid all operating situations that could cause repeated and unexpected stops of the brush’s rotation, such as those specified below:
- In the case of surfaces comprised of panels, the maximum distance between them must be 3 cm to prevent the unit from dropping into the empty space between one panel and the next.
- The surfaces must be as free as possible of protruding parts such as long screws, brackets, and terminals, which could obstruct brush rotation or rharm the bristles.
- This is a low water pressure brush, water can be from the tap, or one of many water pumps and water boost pumpes. Generally less tan 100PSI
- When not in operation, never allow the unit’s weight to rest on the rollers’ bristles so as not to bend them when resting.
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water. Proposition 65 requires California to publish a list of chemicals known to cause cancer, birth defects or other reproductive harm. This list, which must be updated at least once a year, has grown to include approximately 900 chemicals since it was first published in 1987. Proposition 65 became law in November 1986, when California voters approved it by a 63-37 percent margin. The official name of Proposition 65 is the Safe Drinking Water and Toxic Enforcement Act of 1986.
The list of chemicals contains a wide range of naturally occurring and synthetic chemicals that include additives or ingredients in pesticides, common household products, food, drugs, dyes, or solvents. Listed chemicals may also be used in manufacturing and construction, or they may be byproducts of chemical processes, such as motor vehicle exhaust. For more information visit www.p65warnings.ca.gov/
.jpg?w=800&h=800)
.jpg?w=800&h=800)
