Videos
ProTool Dual RO Dual Operator High Flow RODI Wall Mount Kit
Quick Overview
- High Output: 4x 12V pumps deliver up to 7.4 GPM of RO or DI water, supporting dual operators or high-flow water for your operation
- Complete Kit: Includes filters, pumps, controllers, and tools for a DIY installation (Are you handy?) in your vehicle or shop.
- Full Control: Dual pump controllers provide flexible water flow management, ensuring efficient and precise operation.
- 3.8 to 4.0 GPM+ of RO water production
- 7.4 GPM at 55 PSI of RO water delivered to the brushes
Show More
$3,182.30
$3,693.20
Experience the cutting edge in water purification with our DIY RO and RODI Water Purification System, designed for easy installation in your vehicle or shop. This comprehensive kit includes everything you need to produce and deliver high-quality RO and DI water, supporting dual operators or high-water flow needs for your operation.
Versatile System:
- Tank-Based Design: Produce and store RO water into your holding tank, Dual Delivery flows can be combined for 7.4+ GPM delivery.
- Dual User Capability: Supports dual operators with options for RO or DI filtered water at the twist of a valve.
- Mounting Options: Can be mounted on van divider walls, van side walls, IBC tank frames, or flatbed trucks/trailers.
Kit Overview:
- 4 - 40" filters for best filter life and water flow
- 4 12v pumps for RO boost and water delivery
- 2 RO Delivery Pumps 1 for each RO offer 3.8 to 4+ GPM of RO production into tank.
- 2 Water Delivery Pumps with pump controller
Each pump delivers 3.2+ GPM (at 55psi) of RO or DI Water
This system can run two brushes (Water-Fed or solar)
or combine the output and support 7.4+ GPM water to a single solar brush
- 2 Pump controllers flexibility and for full control of your water flow Dual Operator Water-Fed or combine the flow for high flow solar panel cleaning.
- Wall mountable for easy installation
- Everything you need to assemble and install into your vehicle is included except for your tank attachment hardware (to the vehicle) and a 12V battery.
- Screw driver, nut driver and electrical tools included. Power tools can be used to speed assembly
This Kit is meant for a fairly knowledgeable or handy person to be able to install
Tank Based system
This tank based DIY system is cutting edge. Produce RO water in to a holding tank. Combine the flow to deliver RO water up to 7.4 GPM.
This system is incredible versatile:
- Support Dual Operators for Water-Fed or Solar Brushes
- Solar brush operator and/or Water-Fed operators
- The absolute best Dual User water delivery with a choice of RO water delivery or at the twist of a valve the operator can choose RO and DI filtered water .
Wall Mount for Housings
- Aluminum frame for 5 stainless steel housings
- Rivnuts are use in the plates to aid in the installed in the mounting plate for easy attachment of the RO Housing
- Can be mounted on a van divider wall, van side wall, the side of an IBC Tank Frame or on a flat bed truck or trailer with additional framing.
- 1 Carbon Filter
- 2 Hi Flow RO filters
- 3 DI filters
Wall Mount for Pumps
- Holds 4 12V pumps
- Bus bars for easy electrical wire and device management.
- Breaker switches for protection
- Dual V16 Pump controller for full control over flow for two users
- 3.5 GPM of pure water is capable of running two off one line.
- Alternatively, combine both delivery pumps into one line for 7.4 GPM
Shipping:
This kit ships in a flat pack box. Assembly is required.
Pump posts and electrical components are pre-installed.
Simply add the pumps on the posts and secure with jam nuts. Use the provided quick connects to connect the electrical wires.
NOTE:
The main reason RO membranes fail in the field is the carbon filter dies quickly and is not maintained.
Regular maintenance of the Carbon Filter important to RO service life.Which is why this kit offers a 1 to 2 year carbon filter life.
The small Carbon filter on most system needs to be replaced every 6 to 8 weeks.
The maintenance cost is kept low as the filters are relatively inexpensive, but poor maintenance can drive up the costs. RO's will fail after just a few months without a properly maintained carbon filter.
Store the RO membrane above 34 degrees F to avoid damaging the filter.
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water. Proposition 65 requires California to publish a list of chemicals known to cause cancer, birth defects or other reproductive harm. This list, which must be updated at least once a year, has grown to include approximately 900 chemicals since it was first published in 1987. Proposition 65 became law in November 1986, when California voters approved it by a 63-37 percent margin. The official name of Proposition 65 is the Safe Drinking Water and Toxic Enforcement Act of 1986.
The list of chemicals contains a wide range of naturally occurring and synthetic chemicals that include additives or ingredients in pesticides, common household products, food, drugs, dyes, or solvents. Listed chemicals may also be used in manufacturing and construction, or they may be byproducts of chemical processes, such as motor vehicle exhaust. For more information visit www.p65warnings.ca.gov/
