Videos
ProTool Oily Man
Quick Overview
- Use whip draw tube direct from Bottle or from a 5 gallon pail
- Apply copious product to insure a saturated surface, allow to dwell for 60 minutes or more, Pressure wash off the area and clean the area.
- Is a great product for the removal of oxidation from vinyl and aluminum siding. Mix at 12oz to 1 gallon of water or stronger as you observe oxidation removal
Show More
$41.50 - $1,621.80
Size Selection
-Zui5L1.png)
Is a great product for the removal of oxidation from vinyl and aluminum siding. Mix at 12oz to 1 gallon of water or stronger as you observe oxidation removal
Mix Ratios:
Cleaning Oil Accumulation on Concrete Floors, Parking Garages, Drive Through, Gas Station Pads, and Oily Dumpster Pads:
Chem Sprayer
Add 12 oz. to 1 Gallon of Water and apply with a chemical sprayer.
Down-streaming or X-Jetting Add 1 Gal of Oily Man to 1 Gallon of water in the Draw Bucket for a 1 to 10 or 10% mix rate down-streamer or X-Jet.Apply copious product to insure a saturated surface, allow to dwell for 60 minutes or more, Pressure wash off the area and clean the area.
For Dark, Long-Standing, Heavy Accumulation of Oil Spots on Concrete Parking Pads, Greasy Equipment, Drive Through:
Chem Sprayer Add 24 oz. to 1 Gallon of Water and apply with a chemical sprayer.
Apply copious product to insure a saturated surface, allow to dwell for 60 minutes or more, Pressure wash off the area and clean the area
Oily Man Clever Mix Rates
12 oz to 1 gallon for Oil on Concrete, etc
A 10 to 1 rate Set Ring to: 10%
Use whip draw tube direct from Bottle or from a 5 gallon pail
24 oz to 1 Gallon on Heavy Accumulation
A 5 to I rate Set Ring to 20%
Use whip draw tube direct from Bottle or from a 5 gallon pail
