Orders over $50 enjoy Free Shipping with our Web Promotion.

ProTool Soft Wash Metering System ProTool Valves

Videos

Popular Item

Free Shipping 48 States

ProTool Soft Wash Metering System ProTool Valves

Quick Overview

Dual pumps capable of delivering 7.4 GPM at 60 PSI and 90 PSI, ensuring efficient soft wash operations
Metering valves provide full control over water, sodium hypochlorite (SH), and surfactant ratios for precise customization of soft wash mixtures
3/4-inch inlet and outlet plumbing maximizes flow for consistent and effective distribution of soft wash solution
Ready-to-install DIY setup allows for easy integration into trucks, trailers, or vans
Ideal for cleaning residential exteriors, commercial buildings, and industrial facilities with outstanding efficiency and effectiveness

Item #: 150-0450 UPC : 00669893017467

$1,162.30

$1,414.30

Available Built to Order, Ships in a Week

Soft Wash Metering System

Discover the ProTool Soft Wash Metering System, a comprehensive solution designed to simplify and enhance your soft wash operations. Equipped with dual pumps capable of delivering 7.4 gallons per minute (GPM) at 60 PSI and 90 PSI, this system ensures efficient and reliable performance to meet your soft washing needs.

Featuring metering valves, the ProTool Soft Wash Metering System offers full control over water, sodium hypochlorite (SH), and surfactant ratios, allowing for precise customization of your soft wash mixture. Whether you're tackling delicate surfaces or stubborn stains, this system empowers you to achieve optimal results with ease.

With 3/4-inch plumbing, the ProTool Soft Wash Metering System maximizes flow to ensure consistent and effective distribution of your soft wash solution. This robust plumbing configuration enhances performance while minimizing downtime, allowing you to complete soft wash jobs efficiently.

Ready to install as a do-it-yourself (DIY) soft wash setup, the ProTool Soft Wash Metering System is suitable for installation in your truck, trailer, or van. Whether you're a professional contractor or a DIY enthusiast, this system provides the flexibility and convenience you need to tackle soft wash projects with confidence.

Upgrade your soft wash operations with the ProTool Soft Wash Metering System and experience the convenience, efficiency, and performance it brings to your workflow. Whether you're cleaning residential exteriors, commercial buildings, or industrial facilities, this system is your trusted companion for achieving outstanding results every time.

Kit Highlights:

Dual 90 PSI pumps = 7.4 GPM of flow at typical 60 PSI spraying pressure

Easy to mount wall plate that's ready to mount to truck, trailer or van

Three Metering valves for full control over water, SH and Surfactant.

All parts to plumb the system from the hose barbs in through to the reel.

Spray at 4 gpm at 90 PSI

Ships Ready to install:

This kit ships with posts for mounting the pump, electrical wiring done, and the bracket/metering system mounted.

Just install pumps and connect the quick connects and you are ready to clean.

Mounting screws required. Plate comes with 1/4" clearance holes. Pickup 6 1/4" screws with the length you need to mount to a support bar, side or divider wall.

Plumbed for MAX flow:

With 3/4 in plumbing, this system is ready to output 7.4 GPM at 60PSI to the reel.

3/8" barb for surfactant/masking agent

3/4" barb for SH line

3/4" barb for water

3/4" barb for output

Backed by Dual Pumps:

Two pumps offer a combined 7.4 GPM at 60PSI to the reel.

Dual 12V pumps offer "limp mode" if one fails. That's 3.8 GPM at 60PSI IF you see a pump failure, compared to 100% when a single pump fails.

No down time = no headaches on the job and no upset customers when equipment fails.

12v Diaphragm Style Pumps offer different flow rates at certain PSI pressure

You control the flow volume you want by changing the tip size

A small tip generates more pressure, sort of like putting your thumb over a garden hose end, you get a higher pressure spray.

If you want more flow, more chemistry sprayed from the gun, increase your tip size.

At higher pressures a diaphragm pump will produce less flow., the sweet spot for this system is 55 to 65 PSI for great flow.

This system includes the two pumps you will need for soft washing and rinsing.
You would need:
Storage Tanks and hoses for water and the input chemicals
Water + 3/4in Suction Hose from Water Tank to the Metering System
SH (sodium hypochlorite, bleach tank +1/2in Suction Hose from SH Tank to the Metering System
Surfactant (Could use 5 gallon Bucket) + 3/8in clear braid line from Surfactant tank to Metering System)

Mixing Setup - Metering Initial Setup

There is no exact science to where the valves are going to be set for your spraying needs. This will get you close to start and you will need to tune to your needs. The goal is to use as little sH and Surfactant as possible and still get a fast complete and well spread out spray that sticks to the surface from the wand.

The ratio is based upon the difference of the flow allowed by each of the metering valves, Water, SH Sodium Hypochlorite

the strength of the SH (12.5%, 10% Pool Bleach and 6% Retail Store Bleach in a bottle)

Adjust the Surfactant to use as little as possible,

but still see the sudsing action and mix spreading action on the sprayed surface

When using 12.5% Sodium Hypochlorite

For a 6% hot SH Mix, for very bad roof mold

The Water Valve is set to 10
The Bleach Valve is set to 10
The Surfactant is set t0 1 to 2

When Targeting a 3% sH mix using 12.5%

The settings will be similar to this:

The Water Valve is set to 10
The Bleach Valve is set to 4
The Surfactant is set t0 1 to 2

When targeting siding, fences, decks and other building surfaces a 1% to 2% mix is appropriate

Start with these settings to Target a 1.5% mix

The Water Valve is set to 10
The Bleach Valve is set to 2
The Surfactant is set t0 1 to 2

Note: These settings are not exact but a good starting point.

As the SH ages it will lose potency, so older bleach, pool bleach that will cause you toi increase the SH numbers

Note on Using store bought bleach

6% Retail Bleach or stale 12.5% SH or Stale 10% Pool Bleach where the contents have degraded to less potency.

If you are at 10 on the bleach and 10 on the water and feel you need a stronger mix review below

This can easily happen with store bought beach that was on the shelf for 6 months...

Turn the water down from 10 to 6 and see how the strength looks when spraying. Are you getting the browning action you wated...

You can continue to turn the Water down until you get a good browning and clean rinse.

Watch the mix spread out on the surface

if the mold is browning nicely (dying) and is rinsing clean

you want to use just enough to get a good clean, but not waste the SH.

So with good browning and a clean rinse you have enough SH in the mix,

You can adjust the SH down until the browning is slower than you would

like and then adjust back up for a good browning action.

Output to the wand….

3/4in Clear Braid Line from the metering system to your Reel Swivel Barb
1/2in minimum (or better 5./8in) Clear Braid Hose on the Reel 150 to 200ft of spraying hose
Trigger Gun on end of the hose to spray with a selection of spray tips.

As shown here as part of a system:

Flow Rate Chart

Here are flow rates for various tip orifices sizes.

TIP

.23"

FLOW

2 GPM

3.1 GPM

4.1 GPM

5.2 GPM

6.4 GPM

7.8 GPM

DISTANCE

30 FT

33 FT

40 FT

45 FT

46 FT

42 FT

Features:

Dual pumps capable of delivering 7.4 GPM at 60 PSI and 90 PSI, ensuring efficient soft wash operations
ProTool Metering valves provide full control over water, sodium hypochlorite (SH), and surfactant ratios for precise customization of soft wash mixtures
3/4-inch plumbing maximizes flow for consistent and effective distribution of soft wash solution
Ready-to-install DIY setup allows for easy integration into trucks, trailers, or vans
Empowers both professional contractors and DIY enthusiasts to achieve optimal soft wash results with ease
Robust construction and reliable performance enhance productivity and minimize downtime
Ideal for cleaning residential exteriors, commercial buildings, and industrial facilities with outstanding efficiency and effectiveness

The plate dimensions are:

21in wide by 12in high,

The holes in the corner are 18in wide 1.5in in from the edge on the long side
The center hole is 10.5 in in from the edge on the long side
The holes are 11in apart on the short side.

The installation needs 4 to 5 inches above and below the plate to accommodate the pumps and allow for clearance of the hose connections. So a 22 wide by 22 high dedicated space would be sufficient

The plate dimensions are:

21in wide by 12in high,

The holes in the corner are 18in wide 1.5in in from the edge on the long side
The center hole is 10.5 in in from the edge on the long side
The holes are 11in apart on the short side.

The installation needs 4 to 5 inches above and below the plate to accommodate the pumps and allow for clearance of the hose connections. So a 22 wide by 22 high dedicated space would be sufficient

Soft Wash metering system installation guide economy.pdf

Additional Information
Featured Homepage	Featured , New

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water. Proposition 65 requires California to publish a list of chemicals known to cause cancer, birth defects or other reproductive harm. This list, which must be updated at least once a year, has grown to include approximately 900 chemicals since it was first published in 1987. Proposition 65 became law in November 1986, when California voters approved it by a 63-37 percent margin. The official name of Proposition 65 is the Safe Drinking Water and Toxic Enforcement Act of 1986.

The list of chemicals contains a wide range of naturally occurring and synthetic chemicals that include additives or ingredients in pesticides, common household products, food, drugs, dyes, or solvents. Listed chemicals may also be used in manufacturing and construction, or they may be byproducts of chemical processes, such as motor vehicle exhaust. For more information visit www.p65warnings.ca.gov/