Pump Motor for Vane Pump for RODI
Quick Overview
- This electric 110v Pump is used in many systems with a rotary pumo to boost water pressure for RO Water production or Solar Panel cleanng
- Split-phase pump AC motor is single phase with a lower starting torque for softer startup where the pump will gradually come up to speed after startup
- Can be used as replacement pump for many systems
Show More
$527.35
$610.60
Pump Motor for Vane style Pumps on RODI systems
Split-phase pump AC motor is single phase with a lower starting torque for softer startup where the pump will gradually come up to speed after startup.
This has a open drip proof (ODP) enclosure with ventilation openings in the endshields and shell positioned so that drops of liquid falling within 15° from vertical will not affect motor performance.
- 1/2 Horespower
- Voltage 115v AC Split Phase
- Amps 7.2
- Thermally Protected - will shut off when overheated and turn back on autmativally
- Duty Cycle - Continuous
- Cradle Base
- Shaft 5/8in
- Ball Bearings
- Weight 17lbs
- UL Recognized
- Model # 5KH36MNB637X
Replacement in a water system is straighforward:
Tools Required:
A Couple screwdrivers and some Wrenches for the 4 bolts to the frame and a plier for the Electrical hard connection.
First ! Unplug the unit
1) Remove the Cover on the motor and expose the wires, (take a picture to get the wires in the same places)
2) remove the wires from the motor.
3) Loosen the "Ring Connector" this clamp like ring that holds the pump to the motor Leave the Ring Connector/clamp on the pump
4) Seperate the pump from the motor (just 1inch is enough)
5) Remove the 4 Mounting Bolts
6) Remove the motor.
Assembly
1) Place the motor on the cart and attach with 4 mounting bolts
2) Line up the pump shaft and motor slot and attach to end
3) Slip the ring connector over the pump and the motor attaching rings and tighten
4) insert the wires and connect per the picture
5) Close up the connector and replace the cover.
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water. Proposition 65 requires California to publish a list of chemicals known to cause cancer, birth defects or other reproductive harm. This list, which must be updated at least once a year, has grown to include approximately 900 chemicals since it was first published in 1987. Proposition 65 became law in November 1986, when California voters approved it by a 63-37 percent margin. The official name of Proposition 65 is the Safe Drinking Water and Toxic Enforcement Act of 1986.
The list of chemicals contains a wide range of naturally occurring and synthetic chemicals that include additives or ingredients in pesticides, common household products, food, drugs, dyes, or solvents. Listed chemicals may also be used in manufacturing and construction, or they may be byproducts of chemical processes, such as motor vehicle exhaust. For more information visit www.p65warnings.ca.gov/
