Bio-Strip 5 Gallon Pail – The Safe and Effective Coating Removal Solution

Bio-Strip 5 Gallon Pail is the ultimate solution for removing stubborn coatings such as acrylic, elastomeric, epoxy, and polyurethane. This environmentally friendly, soy-based product is designed to provide a safe, effective, and efficient way to strip coatings from both flat and vertical surfaces. With its powerful formulation and flexible application methods, Bio-Strip helps you achieve fast results while maintaining safety and environmental responsibility.

Why Choose Bio-Strip for Coating Removal?

Bio-Strip offers several benefits over traditional chemical strippers, making it the preferred choice for professionals who need both power and safety in their stripping applications.

1. Powerful and Effective: Bio-Strip works efficiently on various coatings, including acrylics, oil-based enamels, polyurethanes, and more. Stripping times vary based on coating type and thickness, giving you control over your project’s needs.

2. Soy-Based and Biodegradable: Made from a soy-based formula, Bio-Strip is biodegradable and user-friendly, providing a safer alternative to caustic chemicals. This reduces the environmental impact while ensuring the safety of both technicians and surrounding areas.

3. Enhanced Efficiency: Bio-Strip delivers fast, reliable results by lifting coatings quickly. The formula’s flexibility allows for multiple applications if necessary, depending on the coating thickness and surface type.

4. Safety First: Bio-Strip’s non-toxic formulation prioritizes safety, making it a safer option than traditional chemical strippers. However, proper safety precautions should always be followed, including wearing PPE and protecting the surrounding area.

How to Use Bio-Strip

Using Bio-Strip is simple, but proper application and technique are key to optimal results.

1. Preparation:

   • Ensure that the surface is clean and dry before applying Bio-Strip.
   • Pre-clean the area with a broom or leaf blower to remove loose debris.

2. Application:

   • Apply Bio-Strip generously to the surface, ensuring full coverage. For flat or vertical surfaces, use a paint roller or brush for even distribution.
   • The recommended mix ratio is 100% Bio-Strip with no dilution needed for maximum efficiency. Stripping time depends on the coating thickness.

3. Dwell Time:

   • Let Bio-Strip sit and dwell on the surface for the recommended time. This can range from 1 to 3 hours, depending on the type and thickness of the coating. For tougher coatings, you may need a second coat or extended dwell time.
   • Tip: Hot water pressure washers can reduce stripping time by up to 50%.

4. Stripping:

   • After the dwell time, use a pressure washer to remove the lifted coating. Make sure to capture and properly dispose of the wash water.
   • Reapply Bio-Strip to stubborn areas and repeat the process if necessary.

5. Post-Application:

   • Once the coating is removed, inspect the surface. Additional applications may be required for full removal.
   • Allow the surface to dry before proceeding with resealing or further treatment.

Coating Types and Stripping Times

The effectiveness of Bio-Strip depends on the coating’s type, thickness, and age. Below are typical stripping times for common coatings:

• Acrylic (8 mils): Stripping time = 1-2 hours
• Acrylic (12 mils) over Elastomeric (8 mils): Stripping time = 3 hours
• Moisture-cured Epoxy (8 mils): Stripping time = 1-2 hours
• Two-part Waterborne Epoxy: Stripping time = 1-2 hours
• Oil & Water Stains (Transparent or Pigmented): Stripping time = 1 hour
• Oil-Based Enamel (8 mils): Stripping time = 1 hour
• Two-component Polyurethane (12 mils): Stripping time = 1-2 hours

These times may vary based on surface temperature, humidity, and the porosity of the substrate. A second application may be required for tougher coatings.

Stripping Old Sealers and Resealing

For pavements and pavers with old sealers, Bio-Strip is invaluable for surface restoration. Many pavements with poorly applied sealers will require stripping before re-sealing. If the old sealer is still in good condition, Bio-Strip can clean and refresh the surface before applying a new layer of sealant.

Safety Considerations

Although Bio-Strip is safer than traditional chemical strippers, safety precautions are essential during the stripping process:

• Protective Gear: Always wear safety glasses, gloves, boots, and protective clothing when applying Bio-Strip.
• Site Security: Secure the work area to prevent anyone from entering while chemicals are in use.
• Waste Disposal: Capture and properly dispose of wash water and residue in accordance with local regulations.

Why Choose Bio-Strip?

• Environmentally Friendly: Bio-Strip’s biodegradable, soy-based formula offers an eco-conscious and effective solution.
• User-Friendly: Safe to handle and easy to apply, making it perfect for both professionals and DIYers.
• Versatile and Effective: Highly effective on a wide range of surfaces and coatings, from vinyl to concrete.
• Faster Results with Hot Water: Using hot water with a pressure washer can significantly reduce stripping time.

Bio-Strip 5 Gallon Pail provides a safe, efficient, and environmentally friendly option for coating removal. Whether you’re restoring pavers, cleaning exterior surfaces, or removing old sealants, Bio-Strip is the reliable solution for your project.

Order Bio-Strip today and experience the superior performance and safety of this eco-friendly stripper!