ProTool 8 GPM Hot Water Pressure Washing & Soft Washing Trailer

Hot Water. Heavy Pressure. Zero Mercy for Grime.

Some jobs need more than cold water and wishful thinking.

The ProTool 8.5 GPM Hot Water Pressure Washing & Soft Washing Trailer brings serious commercial cleaning power to one fully equipped, ready-to-work platform. With an 8.5 GPM, 4,000 PSI pressure washer, an 8 GPM hot water burner, dedicated gas-powered soft washing, and downstream degreasing capability, this trailer is built to take on the jobs that make ordinary equipment sweat.

Greasy concrete. Filthy fleets. Heavy machinery. Industrial properties. Bring it on.

And yes, the heavy-duty 6.5 × 12FT utility trailer is included. This isn't a skid you have to figure out how to haul. It's a complete, integrated cleaning platform built for professional contractors.

8.5 GPM of Hot Water. Grease Doesn't Stand a Chance.

At the heart of this build is an 8.5 GPM, 4,000 PSI commercial pressure washer paired with an 8 GPM hot water burner.

High flow moves dirt and debris. Heat helps break down stubborn grease, oil, and heavy buildup. Put them together, and you've got the muscle to tackle demanding commercial cleaning without fighting every square foot.

From fleet washing and heavy equipment to fuel stations, dumpster pads, and commercial concrete, this system is built for serious production.

More flow. More heat. Less time fighting grime.

Dedicated Soft Washing. Because Not Everything Needs 3,500 PSI.

Sometimes brute force isn't the answer. That's why this trailer also carries a dedicated Comet BPX25 gas-powered soft wash system, delivering approximately 7 GPM at up to 220 PSI.

Apply cleaning solutions efficiently across buildings, roofs, stucco, and other surfaces that call for chemical cleaning rather than high pressure.

With separate pressure washing and soft washing systems onboard, crews can switch between aggressive cleaning and controlled chemical application without hauling around another machine.

Two cleaning systems. One trailer. A whole lot of capability.

Clear Chemical Metering. Know Your Mix.

The ProTool 3/4-inch clear chemical metering manifold gives operators direct control over their water, bleach, and surfactant ratios.

Its transparent design makes it easier to monitor chemical flow, identify air intrusion, and troubleshoot problems without tearing into the plumbing.

Dial in the mix for the job, keep your chemical application consistent, and spend less time guessing what's happening inside the system.

See your flow. Control your chemistry. Get back to cleaning.

Downstream Degreasing. Bring on the Ugly Jobs.

Greasy dumpster pads? Oil-stained equipment? Fuel station concrete that's seen better decades?

This trailer includes a dedicated 16-gallon degreaser tank for downstream chemical application, giving operators another tool for tackling heavy commercial buildup.

Apply degreasing solutions through the pressure washing system, then put the hot water to work on the stubborn stuff.

It's a practical combination for restaurants, fleet yards, industrial facilities, service areas, and other properties where ordinary rinsing just doesn't cut it.

Hot water and degreaser. A bad day for grease.

300 Gallons of Water. Built for Long Days.

A serious cleaning system needs serious onboard capacity.

This trailer carries a 300-gallon water tank, supported by dedicated chemical storage:

• 55 gallons for bleach (SH)

• 16 gallons for downstream degreaser

• 7 gallons for surfactant

The integrated tank layout supports both cleaning systems while keeping the equipment organized and accessible.

More onboard capacity means fewer interruptions when you're working on large properties or moving between cleaning areas.

Big jobs don't stop every five minutes. Neither should your equipment.

High-Capacity Electric Reels. Let the Motors Do the Work.

Hundreds of feet of hose. Zero interest in winding it by hand.

This trailer features high-capacity electric stainless steel hose reels, mounted curbside above the passenger-side wheel well for easy access and efficient hose management.

Electric rewind takes the grunt work out of hose retrieval, while stainless steel construction provides corrosion resistance in demanding cleaning environments.

Less time wrestling hoses. Less operator fatigue. More time getting the job done.

All your hoses curbside. All your winding done for you.

Built-In 110V Charging. Plug In. Lock Up. Walk Away.

Keeping your trailer charged shouldn't mean leaving your equipment exposed.

This ProTool trailer features an integrated 110V battery charging system with a waterproof exterior charging plug mounted directly on the lockbox.

Simply connect external 110V power, and the onboard charger takes care of the battery while the equipment box stays securely locked.

No opening compartments. No exposed chargers. No leaving the lockbox unlocked overnight.

Plug it in. Lock it up. Let the charger do its thing.

Heavy-Duty Trailer Included.

This system comes mounted on a 6.5 × 12FT commercial utility trailer, giving you the equipment and the platform in one complete package.

The open layout provides access to pumps, tanks, plumbing, and service components without squeezing everything into an enclosed compartment.

It's a practical balance of equipment capacity, maneuverability, and accessibility for commercial cleaning operations.

And because it's a complete ProTool build, the system is designed as an integrated unit rather than a collection of unrelated equipment strapped to a trailer.

The trailer's included. The excuses aren't.

Built the ProTool Way.

We don't believe in throwing equipment onto a frame and calling it a professional cleaning system.

ProTool builds are designed around equipment integration, practical layouts, and long-term serviceability. Our construction approach uses an all-aluminum welded base with a bolt-together frame design, combining a strong foundation with accessible, replaceable components.

From equipment placement and plumbing to hose management and operator access, the details matter.

Every complete ProTool skid undergoes in-house system testing before shipment, because discovering problems on a customer's jobsite isn't part of our quality-control plan.

Built tough. Built smart. Built to work.

Under the Hood — Technical Specifications

Built for the Job.

The ProTool 8 GPM Hot Water Pressure Washing & Soft Washing Trailer combines high-flow pressure washing, commercial hot water cleaning, a dedicated Comet BPX25 soft wash system, clear chemical metering, and downstream degreasing on an included 6.5 × 12FT utility trailer.

With 300 gallons of onboard water, dedicated chemical tanks, high-capacity electric stainless steel hose reels, and convenient external 110V charging, it's designed for contractors handling demanding commercial and industrial exterior cleaning.

Big flow. Serious heat. One hardworking trailer.