The Only Brightener That Works on WET Wood

Most brighteners require dry wood and long dwell times. DRP Brightener activates on contact with wet surfaces — neutralizing cleaner residue, opening grain, and restoring natural pH in under 60 seconds. No waiting. No fuzzing. Just vibrant, stain-ready wood.

Safe on All Exterior Wood & Composites

• Decks, railings, stairs (cedar, redwood, pressure-treated)
• Siding, lattice, fencing, pergolas
• Log homes, outdoor furniture, playsets
• Composite & synthetic decking (safe, non-acidic)

5 Pro-Level Benefits

5-Minute Pro Application

1. 1 Clean first with DRP Cleaner
2. 2 Mix: 1 pouch (makes 5 gal) in warm water
3. 3 Apply to WET wood: Sprayer or mop — full coverage
4. 4 Watch it brighten: 30–60 seconds — no scrubbing
5. 5 Rinse lightly → Let dry → Apply Stain

Mixing & Coverage

Pro Tips & Warnings

• Apply to WET wood only — after cleaning, before drying
• Test first — color response varies by wood age & species
• Do NOT let dry on surface — rinse within 2 minutes
• Avoid metal contact — use plastic sprayers & buckets
• Follow with stain within 48 hours for best adhesion

Step 1: Cleaner → Step 2: Brightener (WET) → Step 3: Stain