Description

Micro Jet Rinse Bar Low Pressure 14in

32 micro jets provide precise but gentle rinsing with brush on the glass
Fits between brush and brush socket on any 14 inch (35 cm) Gardiner brush
Provides over-bristle micro jet rinsing
Needs a higher flow rate than standard pencil or Fanjets - recommended 0.8 gallons per minute
Height of jets can be adjusted
Can be used with internal brush jets as well
Lightweight at 48g
Uses John Guest connections on unit
Uses standard Brush T Connector and jet hose - optional extra

Needs 2 longer screws to allow it to be attached between brush body and brush socket (if used on standard brushes, will need 19mm screws. if used on Xtreme will need 16mm)

Screw Choice:

If using on Ultimate, Super-Lite & Universal brushes then the standard 16mm screws will need replacing with 19mm screws
If using on Xtreme brushes then the standard 13mm screws will need replacing with 16mm screws

Please note that if using on a 35cm Universal Sill brush the rinse bar will sit slightly higher than standard on the brush

Please note: The rinse bar does not come with the brush & gooseneck pictured