This ultra-thin polymer coating makes glass, ceramic, porcelain, and other hard surfaces remarkably water, soil, and stain repellent.
Coverage: Protects approximately 1,000 square feet.
Key Benefits
- Repels water, soil, and stains on glass and hard surfaces
- Reduces hard water spots, soap scum, and mineral buildup
- Seals, shines, and protects to reduce cleaning frequency
- Provides long-lasting protection against hard water stains
- Makes cleaning faster and easier while extending surface life
Invisible Shield helps prevent soap scum buildup and mineral deposits, saving time on cleaning while reducing repairs and replacements. Ideal for glass showers, enclosures, sinks, tubs, toilets, wall tile, counters, windows, patio doors, and more.
Surface Prep (Most Important)
If preparation is poor, coating performance will be compromised.
- Deep clean first
- Remove soap scum, mineral deposits, oxidation, and hard water stains
- Use a mild acid cleaner or a glass polish/restoration compound for heavy buildup
- Rinse thoroughly
- Dry completely
- Optional but recommended: Wipe with IPA (isopropyl alcohol) to remove oils
Surface must be clean, bare, and dry.
Application Method
Do NOT spray directly on glass.
What You’ll Need
- Microfiber applicator pad or folded microfiber towel
Application Steps
- Pour a small amount onto the applicator (a little goes a long way)
- Wipe onto glass evenly using overlapping passes
- Apply a thin, uniform coat
- Allow to haze for approximately 1–3 minutes (depending on temperature and humidity)
- Buff off with a clean, dry microfiber towel until the surface is crystal clear
Cure Time
- Light water contact: after approximately 30 minutes
- Full cure: 12–24 hours
- Avoid rain or washing during the curing period
Exterior Window Application
- Apply out of direct sunlight
- Ideal temperature range: 50–85°F
- For increased durability:
- Wait 10–15 minutes between coats
- Apply two coats for best performance
Longevity Expectations
- Exterior glass: approximately 3–6 months
- Interior glass and showers: 6–12 months
- Longevity depends on surface preparation and maintenance
Common Mistakes to Avoid
- Applying to dirty or mineral-etched glass
- Over-applying (thick coats may streak)
- Letting the product dry too long before buffing
- Using ammonia-based cleaners after application
Maintenance
- Clean with:
- pH-neutral soap
- Soft microfiber towels
- Avoid:
- Abrasive materials
- Harsh acids or alkaline cleaners
