ProTool Ball Valve Inline for 5/16 (8mm) Pole Hose

Use this inline ball valve to shut off the flow in your Water-Fed pole line. 3/16" (4.7MM)  barb creates a tight fit with 5/16" (8mm) Water-Fed pole hose. 

No clamp is necessary, although always encouraged.

This is a 1/4 turn ball valve with no stop, it rotates 360 degrees.

When handle is in line with hose the flow is full/open

When the handle is 90 degrees from the hose the flow is stopped 

When the handle is in between those the flow is regulated

Installation Instructions:

1. Heat up the hose end with hot water for roughly 10 seconds. 
2. Work hose onto hose barb all the way. 
3. (optional) Add in a clamp to secure the hose to the barb.