Description

ProTool Dual RO Dual Operator RODI Wall Mount

This is a dual user NANDOLORIAN System.

Experience the cutting edge in water purification with our DIY RO and RODI Water Purification System, designed for easy installation in your vehicle or shop. This comprehensive kit includes everything you need to produce and deliver high-quality RO and DI water, supporting dual operators or high-water flow needs for your operation.

Comes fully assembled or as a DIY Kit

Versatile System:

Tank-Based Design: Produce and store RO water into your holding tank, Dual Delivery flows can be combined for 7.4+ GPM delivery.
Dual User Capability: Supports dual operators with options for RO or DI filtered water at the twist of a valve.
Mounting Options: Can be mounted on van divider walls, van side walls, IBC tank frames, or flatbed trucks/trailers.

Kit Overview:

4 - 40" filters for best filter life and water flow
4 12v pumps for RO boost and water delivery
2 RO Delivery Pumps 1 for each RO offer 3.8 to 4+ GPM of RO production into tank.
2 Water Delivery Pumps with pump controller

Each pump delivers 3.2+ GPM (at 55psi) of RO or DI Water

This system can run two brushes (Water-Fed or solar)

or combine the output and support 7.4+ GPM water to a single solar brush

2 Pump controllers flexibility and for full control of your water flow Dual Operator Water-Fed or combine the flow for high flow solar panel cleaning.
Wall mountable for easy installation
Everything you need to assemble and install into your vehicle is included except for your tank attachment hardware (to the vehicle) and a 12V battery.
Screw driver, nut driver and electrical tools included. Power tools can be used to speed assembly

This Kit is meant for a fairly knowledgeable or handy person to be able to install

Tank Based system

This tank based DIY system is cutting edge. Produce RO water in to a holding tank. Combine the flow to deliver RO water up to 7.4 GPM.

This system is incredible versatile:

Support Dual Operators for Water-Fed or Solar Brushes
Solar brush operator and/or Water-Fed operators
The absolute best Dual User water delivery with a choice of RO water delivery or at the twist of a valve the operator can choose RO and DI filtered water .

Wall Mount for Housings

Aluminum frame for 5 stainless steel housings
Rivnuts are use in the plates to aid in the installed in the mounting plate for easy attachment of the RO Housing
Can be mounted on a van divider wall, van side wall, the side of an IBC Tank Frame or on a flat bed truck or trailer with additional framing.
1 Carbon Filter
2 Hi Flow RO filters
2 DI filters

Wall Mount for Pumps

Holds 4 12V pumps
Bus bars for easy electrical wire and device management.
Breaker switches for protection
Dual V16 Pump controller for full control over flow for two users
3.5 GPM of pure water is capable of running two off one line.
Alternatively, combine both delivery pumps into one line for 7.4 GPM

Shipping:

This kit ships in a flat pack box. Assembly is required.

Pump posts and electrical components are pre-installed.

Simply add the pumps on the posts and secure with jam nuts. Use the provided quick connects to connect the electrical wires.

ro-membrane-connections-water-in-from-carbon-filter.jpg

Tank and Reels not included

NOTE:

The main reason RO membranes fail in the field is the carbon filter dies quickly and is not maintained.

Regular maintenance of the Carbon Filter important to RO service life.

Which is why this kit offers a 1 to 2 year carbon filter life.

The small Carbon filter on most system needs to be replaced every 6 to 8 weeks.

The maintenance cost is kept low as the filters are relatively inexpensive, but poor maintenance can drive up the costs. RO's will fail after just a few months without a properly maintained carbon filter.

Store the RO membrane above 34 degrees F to avoid damaging the filter.