ProTool Felt Polishing Pad 5in

Felt Polishing Pad 5in

Polishing pads do not polish the surface by themselves.

They are the base platform for the cerium oxide to adhere to. 

For best performance, prepare your pad before first use and again during use to adequately and efficiently polish your glass. 

We recommend making a thin slurry the consistency of mud using a small amount of cerium and spreading that over the surface of your polishing pad when you first receive it. you can allow the pad to dry overnight and then use your pad with water when you are ready to polish.

Mix 1 part of cerium with 2 part water in a small squirt bottle and squeeze small amounts of the slurry into the center of your polishing pad as you work the pad on the surface. 

Use just enough water to keep your pad moist as you work so you don’t burn the cerium onto your glass. 

Don’t use very much cerium on the pad as too much cerium will begin to act as a lubricant instead of a polish.