ProTool Hose for Solar Brush 1/4in 50ft with 1/4in one end 3/8in on other

Blue Pressure Washer Hose

1/4in Male Thread on one end
3/8in Male fittings on the other end

The 1/4 fitting is used at the top of the pole, either with Quick Connector adaptor and bracket or a Gardiner Pole Adapter and an M22 Fitting for use with a pressure washer powered Solar Brush 

Typical Addon Items: 

• 157-4112 - Washing Adaptor 
• 74-4220 - M22 Twist to 1/4 Male NPT SS
• 155-4391 Gardiner 39ft SLX Pole 
  

Hose that is used to connect the pressure washer to the wand or surface cleaner when pressure washing. 

50ft hose is typically manually rolled up for storage. Lengths from 100ft and longer are stored on a reel  on the service vehicle.

ConstructionTube - Nitrile synthetic rubber

Cover - Blue oil-resistant synthetic rubber (Medium Oil Resistance)

Reinforcement - Braided (1) steel wire 3000 psi

Temperature - 20°F to 250°F (-29°C to 121°C)

Hose Ends -

• (1) 3/8" Male Pipe Rigid fitting and
• (1) 1/4" Male Pipe Swivel fitting
• With Bend Restrictors

Packaging: Coiled and ready for shipment

Note: When the Gardiner Pole is used the First Section is removed to install the adaptor.

Gardiner SLX39

An excellent pole choice for use with the Solar Brushes, Softwash Spraying Tips etc 

Remove the Brush and the First Section and use this Pressure Washing hose to mount a M22 Fitting for Solar Brush attachment

Solar Brushes:

159-132 16in Counter Rotating Solar Brush

159-135 Rotary Brush 32 in

159-134 Rotary Brush 24 in