ProTool HydroBoost Portable Water Fed Pole Booster Pump
Lightweight, Portable Booster Pump for Better RODI and Water Fed Pole Performance
The ProTool HydroBoost Portable Water Fed Pole Booster Pump is a lightweight, professional booster pump designed to improve water pressure before your RODI system, helping increase pure water production, improve water fed pole performance, reach taller windows, and support demanding multi-operator setups.
Built specifically for professional window cleaners, the HydroBoost solves one of the most common problems in pure water cleaning: not enough incoming water pressure.
Low source pressure can reduce RO membrane production, limit water flow at the brush, and make taller water fed pole work more difficult. Simply connect the HydroBoost before your RODI cart or pure water system to increase incoming pressure and get more performance from the equipment you already own.
And unlike heavier painted-steel booster pump systems, the HydroBoost is built around a lightweight, corrosion-resistant aluminum frame designed to be picked up, carried, deployed, and packed away every day.
Small. Lightweight. Easy to carry. Serious boost when you need it.
Boost Pressure Before Your RODI System
The HydroBoost is designed to be installed between your incoming water source and your RODI system.
Instead of trying to compensate for poor water pressure after purification, the HydroBoost increases pressure before water enters the RO membranes.
This additional pressure can help:
-
Improve RO membrane performance
-
Increase pure water production
-
Compensate for poor source water pressure
-
Improve water fed pole flow
-
Overcome pressure loss through long hose runs
-
Improve performance at taller working heights
-
Support multiple water fed pole operators
-
Get more performance from existing RODI equipment
For contractors working at different properties every day, this provides a simple solution to unpredictable water pressure.
Connect the HydroBoost, connect your RODI system, and get to work.
Lightweight Aluminum Carry Frame
A portable booster pump should actually be portable.
The HydroBoost is built on a lightweight aluminum frame instead of a heavy painted-steel platform.
Aluminum construction reduces unnecessary weight while also providing excellent resistance to the wet working environments encountered by professional window cleaners.
Frame Features
-
Lightweight aluminum construction
-
Corrosion-resistant design
-
Built-in ergonomic carry handle
-
Balanced layout for comfortable carrying
-
Rubber anti-vibration feet
-
Compact, portable footprint
-
Designed for frequent loading and unloading
Component placement is designed around balance, making the HydroBoost easier to pick up and carry between the vehicle, water source, and work area.
The rubber feet help isolate vibration while keeping the unit stable during operation.
Easy-Access Inlet & Outlet Connections
The HydroBoost is designed for fast setup in the field.
Both the inlet and outlet connections are positioned for easy access, simplifying connection between the water source, booster pump, and RODI system.
The straightforward plumbing layout makes the HydroBoost easy to understand, easy to deploy, and easy to integrate with professional pure water equipment.
The typical setup is simple:
Water Source → HydroBoost Booster Pump → RODI System → Water Fed Pole
No complicated installation is required.
Integrated Regulator & Bypass Protection
Water fed pole cleaning isn't a constant-flow application. Operators regularly shut water off at the pole while moving between windows, repositioning equipment, or changing work areas.
The HydroBoost incorporates a regulator and bypass system designed to manage the pump when downstream water flow is stopped.
When the water fed pole is shut off, the system can bypass water rather than forcing the pump to operate against a closed outlet.
This makes the HydroBoost better suited to the real-world stop-and-start operation of professional water fed pole cleaning.
HydroBoost 12V Booster Pump
The HydroBoost 12V combines portability with flexible power options for mobile window cleaning operations.
Pump Performance
-
12V booster pump
-
5 GPM maximum pump capacity
-
Approximately 2 GPM at 90 PSI
-
Designed for RODI and water fed pole applications
The 12V model also includes a 110V power pack, allowing the same portable booster pump to operate from standard AC power when available.
This gives contractors flexibility to use the HydroBoost from a compatible mobile power source or plug into a wall outlet or generator through the supplied power pack.
12V Model Features
-
12V pump
-
110V power pack
-
Built-in breaker switch
-
Portable aluminum frame
-
Regulator and bypass
-
Easy-access inlet and outlet
-
Rubber anti-vibration feet
-
Ergonomic carrying handle
It's a versatile choice for contractors who want a lightweight booster pump with flexible power options.
HydroBoost 110V Booster Pump
For operators who want higher-pressure performance from standard AC power, the HydroBoost 110V provides approximately:
2 GPM at 125 PSI
The additional pressure makes the 110V HydroBoost an excellent option for demanding pure water applications where pressure loss or low incoming water pressure is limiting system performance.
110V Model Features
-
110V booster pump
-
Approximately 2 GPM at 125 PSI
-
Built-in mounted GFCI protection
-
Portable aluminum frame
-
Regulator and bypass
-
Easy-access inlet and outlet
-
Rubber anti-vibration feet
-
Ergonomic carrying handle
The integrated GFCI provides additional electrical protection while keeping the electrical system mounted directly to the unit for a clean, portable package.
Improve RO Production
RO membranes depend heavily on incoming water pressure.
When source pressure is poor, an RODI system may produce significantly less pure water than it is capable of producing under better operating conditions.
Installing a booster pump before the RODI system increases feed pressure to the RO membranes, helping the system operate closer to its intended performance.
For professional window cleaners, that can mean:
-
Faster pure water production
-
Better RODI system performance
-
Improved jobsite productivity
-
Less waiting for water
-
More usable flow at the water fed pole
If your pure water system performs great at one property and poorly at another, incoming water pressure may be the difference.
HydroBoost gives you a portable way to address it.
Reach Higher with Your Water Fed Pole
Every foot of hose and every additional foot of working height introduces resistance and pressure loss.
That becomes increasingly important when cleaning taller buildings with a water fed pole.
Adding a HydroBoost before the RODI system can provide the additional incoming pressure needed to help maintain better system performance on demanding jobs.
That makes HydroBoost an excellent companion for contractors using longer hoses and taller water fed poles.
Run Multiple Water Fed Pole Operators
Higher pure water demand can also become an issue when multiple operators are working from the same RODI system.
A HydroBoost can help improve feed pressure and RO production, giving appropriately sized pure water systems more incoming pressure to support higher-demand workflows.
For growing window cleaning companies, that makes the HydroBoost useful for expanding beyond a basic single-operator setup without immediately replacing the entire pure water system.
One Booster Pump. Multiple Problems Solved.
The HydroBoost isn't just for properties with bad water pressure.
It can be used whenever additional feed pressure can improve your pure water cleaning setup.
Ideal Applications
-
Low incoming water pressure
-
Water fed pole window cleaning
-
RODI pure water systems
-
Increasing RO production
-
Taller window cleaning
-
Long hose runs
-
Multi-operator water fed pole systems
-
Commercial window cleaning
-
Residential window cleaning
-
Mobile pure water cleaning
12V or 110V — Choose the HydroBoost for Your Setup
Both HydroBoost models share the same portable, lightweight philosophy while providing different performance and power options.
HydroBoost 12V
Best for contractors who prioritize portable and flexible power options.
HydroBoost 110V
Best for contractors who want higher-pressure performance from standard AC power.
Both models feature the lightweight aluminum frame, ergonomic carry design, anti-vibration feet, easy-access plumbing, and bypass regulation that define the HydroBoost platform.
Built for Professional Window Cleaners
The ProTool HydroBoost Portable Water Fed Pole Booster Pump takes a piece of equipment that is traditionally heavy and awkward and turns it into something designed around the way professional window cleaners actually work.
Grab it.
Carry it to the water source.
Connect it before your RODI system.
Boost your pressure.
Whether you're fighting poor inlet pressure, trying to increase RO production, cleaning taller windows, or supporting additional water fed pole operators, HydroBoost provides a simple, portable way to get more performance from your pure water cleaning system.
Lightweight aluminum. Portable power. Better pure water performance.
Summary — ProTool HydroBoost Portable Water Fed Pole Booster Pump
Product Type
- Portable booster pump
- Water fed pole booster pump
- RODI booster pump
- Designed to install before an RODI or pure water system
- Available in 12V and 110V configurations
Specifications
- Dimensions: 12 in × 14 in × 16 in H
- Weight: 20 lbs
- Connections: 3/4 in garden hose inlet and outlet
- Frame: Lightweight aluminum
Primary Applications
- Boosting low incoming water pressure
- Improving RO membrane performance
- Increasing RODI pure water production
- Water fed pole window cleaning
- Reaching taller windows
- Overcoming pressure loss from long hose runs
- Supporting multiple water fed pole operators
HydroBoost 12V
- Pump: 12V
- Maximum pump capacity: 5 GPM
- Performance: Approximately 2 GPM at 90 PSI
- 110V power pack: Included
- Can operate from standard wall or generator power using power pack
- Built-in breaker switch
HydroBoost 110V
- Power: 110V
- Performance: Approximately 2 GPM at 125 PSI
- Built-in mounted GFCI protection
- Higher-pressure option for demanding RODI and WFP applications
Plumbing & Pump Protection
- Easy-access inlet manifold
- Easy-access outlet manifold
- 3/4 in garden hose connections
- Integrated regulator
- Bypass system allows water to recirculate when WFP flow is shut off
- Designed for stop-and-start water fed pole operation
Construction
- Lightweight all-aluminum frame
- Corrosion-resistant construction
- Integrated ergonomic carrying handle
- Balanced design for easier carrying
- Rubber anti-vibration feet
- Compact, portable footprint
System Placement
- Installed before the RODI system
- Typical configuration: Water Source → HydroBoost → RODI System → Water Fed Pole
Key Advantages
- Only 20 lbs for easy transport
- Compact 12 × 14 × 16 in footprint
- Helps compensate for poor source water pressure
- Can increase RO production when inlet pressure is limiting performance
- Helps improve performance at taller working heights
- Can help support higher-demand and multi-operator WFP setups
- Aluminum construction eliminates painted-steel frame rust concerns
- 12V and 110V configurations available
- Fast setup using standard 3/4 in garden hose connections
- Designed specifically for professional pure water and water fed pole cleaning
