RODI 20in Filters w- 1 HiFlow RO 1 Pump

with One 4inx40in High flow RO Membrane

with a Pump to water increase flow through the membrane

Pure Water is created by removing the sediments and total dissolved solids (TDS) from the water. The process of making pure water involves a chemical and electrical process.

40in filters offer the best flow and service life, the products offered here provide excellent water quality and long service life.

• 20in Carbon Filter - 120,000 gallons - Change twice per year February and August when used regularly, minimum once a year for lightly uses systems.
• 40in RO Industry Standard High Flow Membrane provides greater up to 3 gpm flow at 110PSI and with the proper startup and end of job procedure followed will last 5 to 7 years, flow with a Tank Draw with a 12v Pump expect about 1.9 GPM depending on the temperature
• 20In DI offers an industry leading amount DI Resin, with a long service interval, change when the water output rises above 10 tds on your tds meter.
• Pump for Pressurizing the RO Membrane
• Mounting Plates for the wall or inside of the vehicle

NOTE:

The RO membranes may fail in the field if the carbon filter is not maintained.

Regular maintenance of the Carbon Filter is very important for RO service life, which is why this kit offers a larger 20" Carbon Filter. Replace this every 6 months.

RO membranes must be stored above 34 degrees F to avoid damaging the filter.