null
Call us: 201-809-7500

► ProTool

Soft Wash Metering System Reel Stand

$2,927.00
Soft Wash Metering System Reel Stand
Soft Wash Metering System Reel Stand
Soft Wash Metering System Reel Stand
Soft Wash Metering System Reel Stand
SKU:
150-0459
UPC:
00669893059825
MPN:
Metering-Stand
Availability:
Current Stock:

Frequently Bought Together:

Soft Wash Metering System Reel Stand
Inc. Tax
Ex. Tax

Description

Soft Wash Metering System with Reel Stand

Key Features:

Precision Metering Valves: This system features three metering valves for water, sodium hypochlorite (bleach), and detergent/surfactant. These valves allow simultaneous drawing of bleach and surfactant into your soft washing solution, ensuring optimal mixing and application.

Convenient On-Board Mixing: Mix surfactants directly at the control panel without the need for manual measuring or mixing in a separate tank. This innovative feature allows for on-the-fly adjustments of mix ratios depending on the surface being cleaned, enhancing efficiency and accuracy.

Dual 12V 90 PSI Pumps: The system is powered by two robust 12V, 90 PSI pumps combined these pumps supply 7 gallon per minute flow rate at 60psi and 4 gpm at 90 psi, they provide an exceptional flow, perfect for all your soft washing requirements. 

Plus ... The dual pump setup ensures that even if one pump fails, you still have sufficient flow and pressure to complete the job. Dual pumps combined reel stand can send the blend and spray the chemical mix  at 5 gpm through the 200ft of 1/2" hose, spraying gun, and tip.

This reel stand is used as part of a softwash spraying system and would need to be plumbed to the customer provided tanks

metering-stand-a-150-0459.jpg

protool-metering-block-plate-truck-van-mount-150-0455.jpg

protoom-soft-wash-metering-block-150-0454[1].jpg

Includes:
  • Aluminum Reel Stand - 24in wide 19in Tall and 18in deep.
  • Pump Specifications: Two 12V, 90 PSI, 5.3 GPM (Open Flow)
  • ProTool Metering Valves: Three, for precise chemical mixing, typically Water, SH and Surfactant
  • 3/4in Inlet barbs for Water and  SH, 3/8 inlet barb for Surfactant, 3/4in outlet barb to pumps
  • PP Manifold Block, Stainless Steel Barbs.
  • 12ft of 3/4in Suction Line 
  • Aluminum Reel with SS manifold and Swivel
  • 200ft of 1/2in ProTool Blue Braid Spraying Hose

Provides plenty of flow and proportional blending of the chemicals for gar powered diaphragm pumps tested at > 9 GPM+ flow . 

There is an 3/4in additional port in the manifold for use with a Pumps that requires a regulator return line. 

This ships with the port plugged with a 3/4in plug.

Flow Rate Chart

Here are flow rates for various tip orifices sizes.

Tip — Flow — Distance
TIP FLOW DISTANCE
20 2 GPM 30 FT
30 3.1 GPM 33 FT
40 4.1 GPM 40 FT
50 5.2 GPM 45 FT
60 6.4 GPM 46 FT
.23" 7.8 GPM 42 FT

Features:

  • Dual pumps capable of delivering 7.4 GPM at 60 PSI and 4 gpm 90 PSI, ensuring efficient soft wash operations
  • ProTool Metering valves provide full control over water, sodium hypochlorite (SH), and surfactant ratios for precise customization, proportioning  of soft wash mixtures

Mixing Setup - Metering Initial Setup

There is no exact science to where the valves are going to be set for your spraying needs.

This will get you close to start and you will need to tune to your needs.

The goal is to use as little sH and Surfactant as possible and still get a fast complete and well spread out spray that sticks to the surface from the wand.

The ratio is based upon the difference of the flow allowed by each of the metering valves, Water, SH Sodium Hypochlorite
the strength of the SH (12.5%, 10% Pool Bleach and 6% Retail Store Bleach in a bottle)
 
Adjust the Surfactant to use as little as possible,
but still see the sudsing action and mix spreading action on the sprayed surface
 
When using 12.5% Sodium Hypochlorite
For a 6% hot SH Mix, for very bad roof mold
  • The Water Valve is set to 10
  • The Bleach Valve is set to 10
  • The Surfactant is set to 1 to 2
 
When Targeting a 3% sH mix using 12.5%
The settings will be similar to this:
  • The Water Valve is set to 10
  • The Bleach Valve is set to 4
  • The Surfactant is set to 1 to 2
When targeting siding, fences, decks and other building surfaces a 1% to 2% mix is appropriate
Start with these settings to Target a 1.5% mix
  • The Water Valve is set to 10
  • The Bleach Valve is set to 2
  • The Surfactant is set to 1 to 2
Note: These settings are not exact but a good starting point.
As the SH ages it will lose potency, so older bleach, pool bleach that will cause you toi increase the SH numbers
 
Note on Using store bought bleach

6% Retail Bleach or stale 12.5% SH or Stale 10% Pool Bleach where the contents have degraded to less potency.

If you are at 10 on the bleach and 10 on the water and feel you need a stronger mix review below

This can easily happen with store bought beach that was on the shelf for 6 months...

Turn the water down from 10 to 6 and see how the strength looks when spraying.
Are you getting the browning action you wated...
You can continue to turn the Water down until you get a good browning and clean rinse.
 
Watch the mix spread out on the surface
if the mold is browning nicely (dying) and is rinsing clean
you want to use just enough to get a good clean, but not waste the SH.
So with good browning and a clean rinse you have enough SH in the mix,
You can adjust the SH down until the browning is slower than you would
like and then adjust back up for a good browning action.

Details

CA Prop 65:
Warning: This product contains chemicals or materials known to the State of California to cause cancer, birth defects or other reproductive harm.

Related Products

Soft Wash Metering Block Soft Wash Metering Block

Soft Wash Metering Block

$516.60 - $562.20
Soft Wash Metering Valve System  Soft Wash Metering Valve Mixing Manifold Block:  High Flow up to 13gpm with Precision Control for Professional Soft Washing This is a fully assembled...
Options Quick view

Reviews

Q&A

Don't Miss Out