Softwash Sprayer, Pure Water, Water Fed Skid, 2 Delivery Reels

$7,984.20

Description

Pure Water and Softwash Sprayer, Water-Fed Skid

RO-DI Skid for Water-Fed Pure Water Delivery and Softwash Metering System with 50 Gallon Bleach Tank

Introducing the ProTool All-in-One Pure Water Water-Fed Pole and Softwash Sprayer with Metering System and 50 Gallon Bleach tank

The ultimate setup for the space conscious, eco-conscious cleaner. Shipping to one of the 48 States is included in the price of this skid. As this is Freight Shipping we need to know if liftgate service is required at the destination

This solution features a ProTool Softwash Dual Pump Metering Valve System, complete with a robust 12v Twin delivery pump system for robust and reliable Softwash Spraying along with 1.75 to 2 Gallons per minute of Pure Water deliver for Water-Fed pole cleaning.

This offers gobs of water for a single operator or can be used for two Water-Fed pole operators.

The Dual Reel system that includes one reel for your Water-Fed pole and another for the Softwash Spraying. One reel delivers off the back of the truck and the other delivers curbside.

Harness the power of purified water from tap water. Tap water is filtered By the Dual RO Filters and made ready to polish with the DI filter on demand for streak-free window cleaning. Connect the tap water hose to the system and start producing Pure Water for the Water-Fed cleaning as well as being able Softwash from the same input hose.

You can use a portable input water reel and store it on the skid on the left side or as an option add an additional aluminum input reel to the top of the rear facing reel.

The Twin pump Softwash system offer precision metering valves for the Water, SH and Surfactant

Designed for easy installation on your truck bed or onto a trailer, this system delivers awesome pure water production, and a reliable quite Twin Pump 12v Softwash Spraying system elevating your cleaning services to new heights of performance and sustainability.

Skid Details:

Pure Water RODI System

Carbon Filter 4.5 x 20in god for 60,000 gallons, all year
DI Filtration Housing and Cartridge 4.5 x 20in (1 Each)
Stainless RO Housing (2 each)
RO Membranes (2 Each)
RO Boost Pumps 12v (1 qty)
Aluminum Filtration Plate
Reel Stand
Aluminum Reel and 200ft of 3/8in Water-Fed Supply Hose
TDS Meter
Power is managed by resettable Breaker Switch

NOTE:

RO membranes must be stored above 34 degrees F to avoid damaging the filter.

Softwash Spraying System

50 Gallon SH Tank
7 Gallon Water Leveling Tank
7 Gallon Surfactant/Detergent Tank
Twin Pumps for superior flow and redundancy
ProTool Metering Valves for managing the water, SH and Surfactant metering/mixing
Battery Box
Aluminum Reel with 200ft of 1/2in
Breakers and Pump Switches

The Pure Water System relies on Tap Water input to the Carbon Filter to start the water production, there are Two RO Membranes and a 12v RO Boost pump before the membrane to insure the a single operator receives gobs of water and will be able to run 4 to 6 jets, a large solar brush and jets with a a rinse bar with ease.

The 20in Carbon Filter offers 60,000 gallons of filtration, generally this mean you can change it one a year at the beginning of the season, the onboard TDS meter will indicate when it it time to change out the DI Resin.

The smooth operating aluminum reel holds 200 feet of 3/8in blue braid spraying hose.

Soft Wash Metering System

Discover the ProTool Soft Wash Metering System with Reel Stand. This is a robust solution designed to simplify and enhance your soft wash operations. Equipped with dual pumps capable of delivering 7.4 gallons per minute (GPM) at 60 PSI and 5 gpm+ at 90 PSI, this system ensures efficient and reliable performance to meet your soft washing needs.

The reel stand protects all the equipment inside the box frame and provides a nice convenient place for the delivery reel. The included aluminum reel and 200ft of 1/2in hose is pre-installed to fast track your setup time. This kit makes it easy to adapt the soft wash system to fit the needs of your rig!

Featuring metering valves, the ProTool Soft Wash Metering System offers full control over water, sodium hypochlorite (SH), and surfactant ratios, allowing for precise customization of your soft wash mixture. Whether you're tackling delicate surfaces or stubborn stains, this system empowers you to achieve optimal results with ease.

With 3/4-inch input and output plumbing, the ProTool Soft Wash Metering System maximizes flow to ensure consistent and effective distribution of your soft wash solution. This robust plumbing configuration enhances performance while minimizing downtime, allowing you to complete soft wash jobs efficiently.

Key Highlights:

Dual 90 PSI pumps = 7.4 GPM of flow at typical 60 PSI spraying pressure. Provides 5gpm+ of soft wash mix through the reel, 200ft hose and spraying gun!
Three Metering valves for full control over water, SH and Surfactant lines.
Battery Cables 5ft 4 gauge Red and Black
Battery Box
The Reel Stand 19in High by 24 in Wide by 18in Deep
The Curb Side Reel Stand is 19in High by 23 wide and 18 deep
The Softwash Reel is Aluminum Reel with SS Swivel and 200 Feet of 1/2in spraying hose.

* Electric Reel is an optional upgrade*

Plumbed for MAX flow:

With 3/4 in plumbing, this system is ready to output 7.4 GPM at 60PSI to the reel.

3/8" barb for surfactant/masking agent

3/4" barb for SH line

3/4" barb for water

3/4" barb for output

Backed by Dual Pumps:

Two pumps offer a combined 7.4 GPM at 60PSI to the reel.

Dual 12V pumps offer "limp mode" if one fails. That's 3.8 GPM at 60PSI IF you see a pump failure, compared to 100% when a single pump fails.

No down time = no headaches on the job and no upset customers when equipment fails.

12v Diaphragm Style Pumps offer different flow rates at certain PSI pressure

You control the flow volume you want by changing the tip size

A small tip generates more pressure, sort of like putting your thumb over a garden hose end, you get a higher pressure spray.

If you want more flow, more chemistry sprayed from the gun, increase your tip size.

At higher pressures a diaphragm pump will produce less flow., the sweet spot for this system is 55 to 65 PSI for great flow.

This system includes the two pumps you will need for soft washing and rinsing.
You would need:
Storage Tanks and hoses for water and the input chemicals
Water + 3/4in Suction Hose from Water Tank to the Metering System
SH (sodium hypochlorite, bleach tank +3/4in Suction Hose from SH Tank to the Metering System
Surfactant (Could use 5 gallon Bucket) + 3/8in clear braid line from Surfactant tank to Metering System)

Mixing Setup - Metering Initial Setup

There is no exact science to where the valves are going to be set for your spraying needs. This will get you close to start and you will need to tune to your needs. The goal is to use as little sH and Surfactant as possible and still get a fast complete and well spread out spray that sticks to the surface from the wand.

The ratio is based upon the difference of the flow allowed by each of the metering valves, Water, SH Sodium Hypochlorite

the strength of the SH (12.5%, 10% Pool Bleach and 6% Retail Store Bleach in a bottle)

Adjust the Surfactant to use as little as possible,

but still see the sudsing action and mix spreading action on the sprayed surface

When using 12.5% Sodium Hypochlorite

For a 6% hot SH Mix, for very bad roof mold

The Water Valve is set to 10

The Bleach Valve is set to 10

The Surfactant is set t0 1 to 2

When Targeting a 3% SH mix using 12.5%

The settings will be similar to this:

The Water Valve is set to 10
The Bleach Valve is set to 4
The Surfactant is set t0 1 to 2

When targeting siding, fences, decks and other building surfaces a 1% to 2% mix is appropriate

Start with these settings to Target a 1.5% mix

The Water Valve is set to 10
The Bleach Valve is set to 2
The Surfactant is set t0 1 to 2

Note : These settings are not exact but a good starting point.

As the SH ages it will lose potency, so older bleach, pool bleach that will cause you toi increase the SH numbers

Note on Using store bought bleach

6% Retail Bleach or stale 12.5% SH or Stale 10% Pool Bleach where the contents have degraded to less potency.

If you are at 10 on the bleach and 10 on the water and feel you need a stronger mix review below

This can easily happen with store bought beach that was on the shelf for 6 months...

Turn the water down from 10 to 6 and see how the strength looks when spraying. Are you getting the browning action you wated...

You can continue to turn the Water down until you get a good browning and clean rinse.

Watch the mix spread out on the surface

if the mold is browning nicely (dying) and is rinsing clean

you want to use just enough to get a good clean, but not waste the SH.

So with good browning and a clean rinse you have enough SH in the mix,

You can adjust the SH down until the browning is slower than you would

like and then adjust back up for a good browning action.

Shown here as part of a system:

Flow Rate Chart

Here are flow rates for various tip orifices sizes.

TIP

.23"

FLOW

2 GPM

3.1 GPM

4.1 GPM

5.2 GPM

6.4 GPM

7.8 GPM

DISTANCE

30 FT

33 FT

40 FT

45 FT

46 FT

42 FT

ProTool Softwash Sprayer and Pure Water Production for Water-Fed pole

Videos

Details

CA Prop 65:

Warning: This product contains chemicals or materials known to the State of California to cause cancer, birth defects or other reproductive harm.

► ProTool

Softwash Sprayer, Pure Water, Water Fed Skid, 2 Delivery Reels

Frequently Bought Together:

Description