RO DI Wall Mount Dual RO 

Assembled or DIY Kit

Tap Water powered 

20in Sump Style Carbon and DI Filters 

with Two SS RO Housings and 4040 RO Membranes Overview:

• This system is pre-plumbed and ready to use out of the box (once mounted to a surface) **ASSEMBLED VERSION ONLY**
• 2 - 40in RO Membranes in SS Housings 

Offering excellent filter life and lots of water flow

• 1 - 20"  Carbon Filter and Housing 
  Long Lasting Filter, Change once every 6 mos
• 1 - 20" DI Filter and Housing
  Great Capacity DI Cartridge, reduces Refills
• Produces 1.5 - 2 GPM of RO production at 60 PSI.
• Wall mounts for easy installation
• Bracket for Water in and RO Waste out. 
• Convenient Pressure Gauge and RO Waste valve location

Installation Example:

Plate with Dual RO Membrane and the Carbon and DI Filters installed in Van, 1.5-2 Gallons per minute to the brush. Tank is not required. 

Installation as shown from just outside the Van

Plate is conveniently mounted on the divider wall of a van. This tap water system does NOT require a tank or pumps. 

Inlet / Outlet 

Convenient female garden hose for tap water in, and male garden hose for RO waste out. Waste Valve is connected right at the bracket for easy access. 

Bracket is pre-installed on the end of two 4ft hoses and ready to place in an easy to use spot on your vehicle. Popular spots would be just inside a van door. 

Tap Water Powered

This system is powered by tap water only and flows plenty of water for a single operator up to 45-50 ft. Capable of pushing two operators, a RO booster pump is recommended. 

Wall Mount for Housings

• Stainless Steel frame fits 2 stainless steel housings and 2 plastic housings. 
• Rivnuts for mounting all housings and brackets
• Mount in a van, on a flat bed truck or trailer
• 1 Carbon Filter
• 2 RO filters
• 1 DI filter