Wall Mount Hi Flow System 2 ROs 110v Pump Assembled

ProTool Single Operator Hi Flow System

Comes in a DIY Kit or Assembled

Installation in your Vehicle or on Wall required.

• 20in Carbon and DI Housings 
• 1ea Carbon and 1ea DI Filter 
• Two SS RO Housings with Hi Flow Membranes

Kit Overview:

• 2 - 40in RO Membranes in SS Housings 

Offering excellent filter life and lots of water flow

• 1 - 20"  Carbon Filter and Housing 
  Long Lasting Carbon Filter, 120,000 Gallons
•  Change once every 6 months
• NOTE:
• The RO membranes may fail in the field if the carbon filter is not maintained.
• Regular maintenance of the Carbon Filter is very important for RO service life, which is why this kit offers a larger 20" Carbon Filter. Replace this every 6 months.
• RO membranes must be stored above 34 degrees F to avoid damaging the filter.

• 1 - 20" DI Filter and Housing
  Great Capacity DI Cartridge, reduces Refills
• 1 -  110v vane pump for RO boost 
• 1 -  12V Pump for Water delivery 

Produces 4.0 to 4.5 GPM of RO production into tank

Variable Pure Water Delivery flow from 0.5 to 4.0 GPM (managed by the pump controller) of pure water delivered to the brush.

Installation Example:

Plate with Dual RO Membrane and the Carbon and DI Filters install in Van, 2 ROs pumps will make 2 Gallons per minute into the tank.

Installation as shown from just outside the Van

Pumps (RO Pressure and Operator Deliver Pump) and Controller are mounted on a plate and located within easy reach of the door

Pump Plate Detail

The Pump Controller extends battery life, controls water flow for the operator and is easy to use. 5 GPM. 

The Pump Controller manages water flow from the pump from as low as 1/2  gallon a minute for 1st floor windows to 3.5 GPM for Solar Work

Installation as shown from just outside the Van

Pumps (RO Pressure and Operator Deliver Pump) and Controller are mounted on a plate and located within easy reach of the door

Water connection next to the pump plateis Bypass water out from the RO membranes.

Van Installation Details:

Tank Based system

This tank based system is unmatched. 

Produce RO water in to a holding tank. 

Deliver pure water at 2.0 to 4.5 GPM +. 

Excellent Water flow Similar to tap water, or DI tank pressure and flow.

Kit includes 55 gallon tank

Wall Mount for Housings

• Versatile Aluminum frame fits 2 stainless steel housings and 2 plastic housings. 
• Mount in a van, on a flat bed truck or trailer
• 1 Carbon Filter
• 2 Hi Flow RO filters
• 1 DI filter

Wall Mount for Pumps

• 1 - 110v High Output Pump for RO Boost
• 1 - 12V pump for water delivery from the tank
• Bus bars to manage electrical wires
• 40 amp breaker switches 
• Spring V16 Pump controller for full control over water flow for one user
•  From 0.5 to 4.0 GPM of pure water 
• System capable of running two Water-Fed pole operators off one line.

Kit that required Assembly and  

Installation into your vehicle.

The installation would be the attachment of 

The RO Membranes and 20in Housing Plate to the vehicle, wall.

The Pump Plate to an accessible position to be able to control the pumps

Fitment of the Tank and securing it in position.

Routing of the Plumbing, hoses tubes from inlet to the Pump plate, housing plate and water storage tank.

RODI 20in Filters with 2 Standard flow ROs and 1 RO Boost Pump