ABR® Glass De-Etcher - Professional Glass Polishing Compound

ABR® Glass De-Etcher is a powerful polishing compound specifically designed to remove stubborn stains and etching from glass surfaces. It effectively eliminates hydrofluoric acid burns, hard water marks, stains from unsealed masonry runoff, airborne pollution, and acid rain haze—restoring glass to its original clarity.

Key Features:

• Restores Glass: Removes acid etchings and other tough stains caused by pollution and weathering.

• Easy Application: Use with a dampened buffing pad and electric buffer (1500-1700 RPM) for optimal results. Keep the surface wet while buffing.

• Coverage: One 16 oz jar covers 500-600 square feet, making it ideal for both small and large glass surfaces.

• Professional Use: Ideal for commercial, industrial, and residential glass cleaning.

1. Apply ABR® Glass De-Etcher with a dampened buffing pad on a power buffer.

1. Buff in circular motions, keeping the surface wet. Continue until the product dries and disappears.

1. Re-wet the glass and buffing pad, then polish to a smooth, clear finish.

How to Use:

For best results, use with a power buffer—manual application won't yield the same professional finish.

Avoid costly repairs and insurance claims by restoring glass surfaces quickly and effectively. ABR® Glass De-Etcher is the go-to solution for property managers and cleaning professionals seeking a reliable, high-performance product for glass restoration.

Coverage: One 16 oz jar covers 500-600 sq ft.

ABR® Glass De-Etcher is a polishing compound that removes hydrofluoric acid burn stains from glass.  ABR® Glass De-Etcher and X-19 Glass Cleaner & Restorer remove hard water marks, stains caused by run-off from unsealed masonry, airborne pollution and acid rain haze that causes oxidation to glass.

PRODUCT DESCRIPTION: ABR® Glass De-Etcher is a polishing compound that removes hydrofluoric acid burn stains from glass.

LIMITATIONS: Mirrored finishes applied on the outside of glass should not be cleaned with ABR® Glass De-Etcher.

ABR® Glass De-Etcher is not intended for frequent maintenance use. Repeated usage will be harmful to glass surfaces.

PRECAUTIONS: Read the entire material safety data sheet and product label for a more thorough evaluation of hazards.

Fully protect all adjacent surfaces, including aluminum.

TECHNICAL DATA: ABR® Glass De-Etcher Color/ Form: Pink paste.

COVERAGE: ABR® Glass De-Etcher: Approximately 500-800 sq. ft. per pint varying with the texture of the glass surface.

APPLICATION: A test area of any ABRP, Inc. glass product should be performed prior to beginning overall project to determine precise procedures necessary. User shall determine the suitability of the product for its intended use and assumes all risk and liability whatsoever in connection therewith.