ProTool BPX25 Soft Wash Truck Skid — Curbside Reels & Chemical Metering

All Soft Wash. No Wasted Space.

You don't need a giant trailer to wash a house.

You need the right pump, the right plumbing, and equipment that makes sense when you're standing next to your truck.

The ProTool BPX25 Soft Wash Truck Skid is a compact, professional soft washing system built for contractors who want serious cleaning capability without the size, cost, or complexity of a full multi-service rig.

Powered by a Predator 212 engine and ProTool BPX25 pump delivering 7 GPM with 250 PSI regulated spraying, this skid brings high-volume chemical application to residential and commercial exterior cleaning.

With two curbside-facing stainless steel hose reels mounted above the truck bed wall, dedicated chemical and water tanks, a ProTool metering manifold, and an integrated utility box, everything is arranged around one simple goal:

Get to the job. Pull your hoses. Start washing.

Big soft wash performance. Small truck-bed footprint. Zero unnecessary nonsense.

BPX25. Seven Gallons Per Minute of Getting It Done.

When you're soft washing roofs, siding, and commercial buildings, flow matters.

The heart of this skid is the ProTool BPX25 pump, delivering up to 7 GPM of soft wash flow.

Driven by a Predator 212 gas engine, the system provides dedicated pumping power for professional chemical application.

The listed configuration features 250 PSI regulated spraying, providing a controlled delivery setup for soft washing applications.

That combination gives contractors the flow and pressure needed for efficient chemical application across large exterior surfaces.

House washing. Roof cleaning. Building façades. Commercial exterior maintenance.

Seven gallons per minute. Because the job isn't getting any smaller.

Predator 212. Simple, Dependable Gas Power.

Not every cleaning skid needs an elaborate engine package.

This one uses a Predator 212 gas engine to drive the BPX25 soft wash pump.

The straightforward gas-powered design provides a dedicated power source without requiring the operator to build the entire washing operation around a vehicle-mounted electrical system.

It's a practical setup for contractors who value simple operation and serviceability.

Start the engine. Set your mix. Get to work.

No complicated startup sequence. Just a gas engine and a pump ready to earn their keep.

Curbside Reels. Because Climbing Into the Truck Bed Gets Old.

Here's where this skid earns its place on the truck.

Instead of hiding the hose reels inside the bed, the ProTool BPX25 Soft Wash Skid positions two stainless steel reels above the truck bed wall, facing the curbside.

That means your hoses are accessible from beside the truck—not buried behind tanks and equipment.

Curbside Hose Management

• Two stainless steel hose reels

• Mounted above the truck bed wall

• Both reels face the curbside

• Dedicated spray and water-feed hose storage

• Organized hose deployment and retrieval

The elevated arrangement makes practical use of the truck's available space while keeping the reels accessible.

No climbing over tanks.

No crawling around the bed.

No dragging hoses across equipment just to start a job.

Both reels curbside. All your hoses right where you need them.

300 Feet of Soft Wash Hose. Go Reach Something.

A compact skid shouldn't mean being chained to the truck.

This system includes a professional hose package designed for residential and commercial soft washing.

Included Hose Package

• 300FT of 1/2-inch soft wash spray hose, rated to 300 PSI

• 150FT of 3/4-inch water feed hose

The long spray hose provides reach around homes, commercial properties, and other exterior cleaning sites, reducing the need to constantly reposition the truck.

The dedicated water-feed hose makes connecting to an available water supply more convenient.

And with both hoses managed on curbside-facing reels, setup and breakdown stay organized.

Three hundred feet of spray hose. Because parking right next to the building isn't always an option.

Dedicated Tanks. The Right Chemistry for the Job.

Professional soft washing is about more than pumping bleach.

You need control over the mix.

The ProTool BPX25 Soft Wash Skid includes a dedicated three-tank configuration:

• 55-gallon bleach / SH tank

• 55-gallon water tank

• 7-gallon soap / surfactant tank

This arrangement keeps the major components of your cleaning solution separated and ready for controlled blending.

Instead of premixing everything in one tank, the system works with the integrated metering manifold to adjust the chemical mixture for the application.

From siding and house washing to suitable roof and building cleaning applications, operators can adjust their chemical ratios as needed.

Water here. Bleach there. Soap where it belongs. That's how a professional setup should work.

ProTool Chemical Metering. Dial In the Mix.

Different surfaces call for different chemical strengths.

A light house wash doesn't necessarily need the same mix as a heavily contaminated roof.

The integrated ProTool chemical metering manifold gives operators control over the water, bleach, and soap being drawn into the soft wash system.

Adjust the mixture to suit the cleaning task without manually premixing every batch.

The result is a more flexible workflow with centralized chemical controls.

It's one of those features that makes a major difference over the course of a workday.

Turn the valves. Dial the mix. Let the BPX25 do the rest.

18-Inch Utility Box. Keep the Little Stuff Under Control.

It's amazing how quickly fittings, spray tips, tools, and accessories can take over a truck bed.

That's why this skid includes an 18-inch utility box for storing everyday cleaning equipment.

Keep your essential tools together instead of letting them roll around between tanks and hoses.

The compact box adds useful storage without turning the skid into an oversized platform.

A place for your tools. Finally.

Truck-Bed Friendly. Built to Stay Out of Your Way.

This skid is designed around a compact pickup-truck installation.

The tanks, engine, pump, chemical metering system, and accessory storage are integrated into one organized layout, while the elevated curbside reels keep hose access convenient.

It's a practical configuration for contractors who want a dedicated soft wash system without committing to a larger trailer or truck build.

Actual fitment depends on truck-bed dimensions, payload capacity, reel clearance, and mounting requirements.

The skid's 117 gallons of combined tank capacity can represent approximately 976 pounds of liquid when filled with water, before accounting for the skid, equipment, chemicals, and accessories. Actual chemical weights vary.

Plan the vehicle installation accordingly.

Big cleaning capability. Without giving up the whole truck.

House Washing. Roof Cleaning. Commercial Work.

The ProTool BPX25 Soft Wash Skid is designed for a range of professional soft washing applications.

Built for Jobs Like These

• Residential house washing

• Roof soft washing

• Siding and exterior wall cleaning

• Commercial building washing

• Façade cleaning

• Suitable low-pressure chemical application

With 7 GPM flow, dedicated chemical storage, and adjustable metering, the system gives contractors a flexible platform for different exterior cleaning projects.

Use appropriate chemicals, concentrations, and application methods for each surface.

One skid. A whole lot of dirty buildings.

Built the ProTool Way.

A good soft wash skid isn't just a pump bolted next to a bleach tank.

It's how the equipment is arranged, how the plumbing works, and how easily the operator can use and maintain the system.

ProTool builds are engineered around practical equipment layouts, professional components, and real-world cleaning workflows.

Our skid construction approach uses an all-aluminum welded base with a bolt-together frame design, combining a durable foundation with accessible components.

From the curbside reel placement to the metering manifold and tank layout, the system is designed around everyday usability.

Complete ProTool skids undergo in-house system testing before shipment.

And ProTool skids and systems are backed by a lifetime warranty, subject to applicable terms and exclusions, along with long-term technical support.

Because simple equipment should still be built to last.

Commercial construction. Smart layout. Real support.

Under the Hood — Technical Specifications

Built for the Job.

The ProTool BPX25 Soft Wash Truck Skid combines a Predator 212-powered, 7 GPM BPX25 pump, 250 PSI regulated spraying, three dedicated chemical and water tanks, and an integrated metering manifold into one compact truck-ready platform.

With two elevated stainless steel curbside hose reels, 300 feet of spray hose, 150 feet of water-feed hose, and an 18-inch utility box, it's designed to make professional soft washing simpler from the moment you arrive.

Seven GPM. Curbside reels. Full chemical control.

Pull the hose. Dial the mix. Wash the building.

Frequently Asked Questions

What pump does this skid use?

The system uses a ProTool BPX25 soft wash pump delivering 7 GPM.

What engine powers the pump?

A Predator 212 gasoline engine.

What is the operating pressure?

The listed configuration uses 250 PSI regulated spraying.

How much hose is included?

The skid includes 300 feet of 1/2-inch, 300 PSI-rated spray hose and 150 feet of 3/4-inch water-feed hose.

Where are the hose reels located?

Both stainless steel reels are elevated above the truck bed wall and face the curbside for convenient access.

Are the hose reels electric?

The supplied specifications identify stainless steel reels but do not confirm electric rewind. Confirm the reel configuration when ordering.

Can I adjust my bleach concentration?

Yes. The ProTool metering manifold allows operators to adjust the proportions of bleach, water, and soap used for soft washing.

How much chemical and water storage does it have?

The skid includes a 55-gallon SH tank, 55-gallon water tank, and 7-gallon soap tank.

Will this fit in my pickup truck?

The skid is designed for compact truck-bed installations. Actual fitment depends on the truck's dimensions, payload rating, and the elevated reel arrangement.

Does this include a pressure washer?

No separate high-pressure pressure washer is specified. This is a dedicated BPX25 soft wash system.